|
[Sponsors] |
anyone tried rhoPorousMRFSimpleFoam in OF 2.0.0? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 29, 2011, 02:20 |
anyone tried rhoPorousMRFSimpleFoam in OF 2.0.0?
|
#1 |
New Member
Suhas
Join Date: Jul 2011
Location: Pune
Posts: 21
Rep Power: 14 |
Hello Foamers,
I am using rhoPorousMRFSimpleFoam for compressor simulation. the mesh is came from starccm+ and checkMesh is ok. Then these are my boundary conditions. I am starting with very slow rotational velocity, i.e. w=1 rad/sec. for p inlet-zeroGradient, outlet-fixedValue, $internalField wall-zeroGradient internalField uniform 2e5; for U inlet-fixedValue, uniform (150 0 0) outlet-zeroGradient, wall-fixedValue, uniform (0 0 0) internalField uniform (1 10 10) for T inlet-totalTemperature, T0 uniform 300, gamma 1.4 outlet-inletOutlet, value $internalField, inletValue $internalField wall-zeroGradient, internalField uniform 298; for mut inlet-calculated uniform 0, outlet-calculated uniform 0, wall-mutkWallFunction uniform 0, internalField uniform 0.018; for k inlet-fixedValue, uniform 70 outlet-zeroGradient wall-compressible: :kqRWallFunction uniform 7, internalField uniform 7; for epsilon inlet-fixedValue, uniform 19222.91 outlet-zeroGradient wall-compressible: :epsilonWallFunction uniform 1922.291, internalField uniform 7; for alphat inlet-calculated uniform 0, outlet-calculated uniform 0, wall-alphatWallFunction uniform 0, internalField uniform 0; my relaxation factors from fvSolution files are p 0.1; rho 1; // I changed this to 0.5 then it ran for about 3500 iterations and then diverges because of thermal properties error message. U 0.3; "(k|epsilon)" 0.5; h 0.5; and rhomax - 1.9 rhomin - 0.6 and thermoType hPsiThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>; mixture { specie { nMoles 1; molWeight 28.9; } thermodynamics { Cp 1007; Hf 2.544e+06; } transport { mu 0.1835e-04; Pr 0.72; } } and I am getting this error after 200 iterations. --> FOAM FATAL ERROR: Maximum number of iterations exceeded From function specieThermo<Thermo>::T(scalar f, scalar T0, scalar (specieThermo<Thermo>::*F)(const scalar) const, scalar (s pecieThermo<Thermo>::*dFdT)(const scalar) const) const in file /opt/software/OpenFOAM/OpenFOAM-2.0.x/src/thermophysicalModels/specie/lnInclude/specieThermoI.H at line 67. FOAM aborting #0 Foam::error:rintStack(Foam::Ostream&) in "/share/openfoam/2.0/OpenFOAM/platforms/linux64Gcc45DPOpt/lib/libOpenFOAM.so" #1 Foam::error::abort() in "/share/openfoam/2.0/OpenFOAM/platforms/linux64Gcc45DPOpt/lib/libOpenFOAM.so" #2 Foam::hPsiThermo<Foam:ureMixture<Foam::constTran sport<Foam::specieThermo<Foam::hConstThermo<Foam:: perfectGas> > > > >::ca lculate() in "/share/openfoam/2.0/OpenFOAM/platforms/linux64Gcc45DPOpt/lib/libbasicThermophysicalModels.so" #3 Foam::hPsiThermo<Foam:ureMixture<Foam::constTran sport<Foam::specieThermo<Foam::hConstThermo<Foam:: perfectGas> > > > >::co rrect() in "/share/openfoam/2.0/OpenFOAM/platforms/linux64Gcc45DPOpt/lib/libbasicThermophysicalModels.so" #4 main in "/share/openfoam/2.0/OpenFOAM/platforms/linux64Gcc45DPOpt/bin/rhoPorousMRFSimpleFoam" #5 __libc_start_main in "/lib64/libc.so.6" #6 Foam::UOPstream::write(char) in "/share/openfoam/2.0/OpenFOAM/platforms/linux64Gcc45DPOpt/bin/rhoPorousMRFSimpleFoam" Abort Please tell me where I am going wrong. Is anybody using rhoPorousMRFSimpleFoam? Regards Suhas |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wigley Hull with OpenFoam 2.0.0 problem | Stephy | OpenFOAM Bugs | 19 | October 12, 2020 10:22 |
OpenFOAM 2.0.0 and Turbomachinery | lindner | OpenFOAM | 0 | July 8, 2011 07:35 |
Version 2.0.0 and Intel Compiler | muxav | OpenFOAM | 1 | July 4, 2011 08:20 |
OpenCFD release OpenFOAMŪ version 2.0.0 | opencfd | OpenFOAM Announcements from ESI-OpenCFD | 1 | July 1, 2011 08:43 |
How to Import Gambit 2.2.16 file to Gambit 2.0.0 | solomon | FLUENT | 0 | January 4, 2007 14:49 |