CFD Online URL
[Sponsors]
Home > Forums > OpenFOAM

Cannot view arc edge in ParaView

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 28, 2010, 15:47
Default Cannot view arc edge in ParaView
  #1
New Member
 
Erlend Grotle
Join Date: Jan 2010
Posts: 2
Rep Power: 0
erlendg is on a distinguished road
I have tried several blockMesDict files trying to make a cylinder using arc. blockMesh seems to go fine, but the arc is not visible in paraview (version 3.6.1). Anyone experienced this ? I used an example from the user manual so I recon the use of arc should be ok.
erlendg is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Paraview User defined view prapanj ParaView 3 January 3, 2014 21:54
ParaView 3.6.1 & 3.7.0: Can't view STL files johannes OpenFOAM Paraview & paraFoam 2 December 3, 2009 15:07
paraFoam reader for OpenFOAM 1.6 smart OpenFOAM Installation 13 November 16, 2009 22:41
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 02:07
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 06:01.