CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

dieselFoam injection-angle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 24, 2010, 05:02
Default dieselFoam injection-angle
  #1
Senior Member
 
Rickard
Join Date: May 2010
Location: Lund, Skåne, Sweden
Posts: 143
Rep Power: 7
Rickard.Solsjo is on a distinguished road
If choosing the hollowConeInjector, it requires input for inner and outerAngle in the sprayProperties.
The default value is 0 for both, so what does this mean? Does it follow the semi-emipirical tan(theta/2)=c(sqrt(rho(amb)/rho(fuel) -.0046 .....) shown by Siebers or Naber or in some other way.
Appreciate an input

R
Rickard.Solsjo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
InterFoam contact angle JoaoMiranda OpenFOAM Running, Solving & CFD 3 August 26, 2014 11:29
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
Angle injection using Monte Carlo method Asghari Main CFD Forum 0 March 22, 2008 03:19
KIVA: Injection angle Sasidhar Main CFD Forum 1 March 1, 2005 11:14
using injection file and parallel process Cindy Jones FLUENT 0 January 23, 2003 13:40


All times are GMT -4. The time now is 13:49.