CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

How to rotate a new created object ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 28, 2003, 07:41
Default How to rotate a new created object ?
  #1
wyh
Guest
 
Posts: n/a
I want to creat a wedge shape in VR through the shape libraries in PHOENICS, anyone knows how to rotate the wedge, and how to set its position? I have done for one case, but it is not what I need. Thanks in advance.
  Reply With Quote

Old   October 29, 2003, 18:25
Default Re: How to rotate a new created object ?
  #2
Leon Mills
Guest
 
Posts: n/a
wyh,

In VR-viwer, open the object diaglog box - goto the buttum marked Rotation, use the flied noted as clipart. Cycle through until the correct rotation appears.

Note: It may be requires to put a plate on the flat sides of the wedge to get a correct flow aound the wedge.

Hope this helps - Leon
  Reply With Quote

Old   November 3, 2003, 10:39
Default Re: How to rotate a new created object ?
  #3
wyh
Guest
 
Posts: n/a
Dear Leon Thanks for your kind suggestion. Can you tell me why a plate should be put on the flat sides of the wedge for getting a correct flow aound the wedge? Thanks.
  Reply With Quote

Old   November 3, 2003, 17:42
Default Re: How to rotate a new created object ?
  #4
Leon Mills
Guest
 
Posts: n/a
This was usggested to me by other users of this forum. Esentially, Phoenics works out temperatures... to the centre of the cell. A plates around the flat edges stops flow from 'esacping' around the edges of the wedge. I found this 'fix' works as without it I was getting flow around the wedges where the wedge should have blocked the floe through the entire cell.

Leon
  Reply With Quote

Old   November 11, 2003, 05:18
Default Re: How to rotate a new created object ?
  #5
wyh
Guest
 
Posts: n/a
I see, Thanks.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to determine the type of an object in the object registry mwild OpenFOAM Running, Solving & CFD 8 June 8, 2010 20:58
Mesh is created in blocking Severin CFX 3 September 18, 2007 09:02
UDF with user created surfaces Henry Lee FLUENT 2 March 23, 2006 04:24
Post file is not created Julie Polyakh CD-adapco 8 January 12, 2004 15:28
How to reuse q1 created by Phoenics V3.1 in V3.5 Song Phoenics 3 April 7, 2003 04:47


All times are GMT -4. The time now is 08:16.