Co-Simulation of a Abdominal Aneurysm

AAAmodel · February 9, 2017, 06:29

Hi All,

I am trying to set-up a mechanical co-simulation between Star CCM+ and Abaqus to measure displacement of an aortic aneurysm.

Does anyone have any idea when running this what i need to set up in Abaqus do I just uses the walls of the aneurysm or do I include the fluid also?

My basic setup is that I have the fluid volume flowing through the walls in Star CCM+.

Any help would be great thanks

ping · February 9, 2017, 08:58

as when tackling all new areas doing a tutorial or two is the best way to learn and it so happens that in your case there is a very relevent one to do and all will be clear

Sent from my iPad using CFD Online Forum mobile app

AAAmodel · February 9, 2017, 09:28

Ping,

I habe completed the relevant tutorial in the Star CCM+ tutorial guide for Mechanical Coupling with Abaqus.

I am just looking for some direction in setting my own up as the tutorial uses a single part within a flow region where as mine is a fluid flow within the part.

ping · February 10, 2017, 08:23

maybe you mean you have a cad model of the solid blood vessel or maybe it is just a surface model either way you will make an fea model of either with solid or shell elements
then for the fluid you take the inner surface of the vessel and add end caps which both create a close surface to creat the fluid cells and also act as inlets and outlets

Sent from my iPad using CFD Online Forum mobile app

February 9, 2017, 06:29	Co-Simulation of a Abdominal Aneurysm	#1
AAAmodel New Member Anon Join Date: Jan 2017 Posts: 4 Rep Power: 9	Hi All, I am trying to set-up a mechanical co-simulation between Star CCM+ and Abaqus to measure displacement of an aortic aneurysm. Does anyone have any idea when running this what i need to set up in Abaqus do I just uses the walls of the aneurysm or do I include the fluid also? My basic setup is that I have the fluid volume flowing through the walls in Star CCM+. Any help would be great thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Waterbell Simulation	o.b.m	Fluent Multiphase	1	November 5, 2015 05:55
setting up a simulation with multiple interactions	phandy	OpenFOAM Running, Solving & CFD	1	October 6, 2014 03:16
mass flow rate issue in supersonic nozzle simulation	xkang	FLUENT	0	July 31, 2014 16:06
Simulation of a complex wing in solidworks flow simulation	niels1900	FloEFD, FloWorks & FloTHERM	6	April 20, 2011 10:44
Continuous vs interrupted simulation	sega	OpenFOAM Running, Solving & CFD	4	November 3, 2008 14:29

February 9, 2017, 08:58		#2
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	as when tackling all new areas doing a tutorial or two is the best way to learn and it so happens that in your case there is a very relevent one to do and all will be clear Sent from my iPad using CFD Online Forum mobile app

February 9, 2017, 09:28		#3
AAAmodel New Member Anon Join Date: Jan 2017 Posts: 4 Rep Power: 9	Ping, I habe completed the relevant tutorial in the Star CCM+ tutorial guide for Mechanical Coupling with Abaqus. I am just looking for some direction in setting my own up as the tutorial uses a single part within a flow region where as mine is a fluid flow within the part.

February 10, 2017, 08:23		#4
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	maybe you mean you have a cad model of the solid blood vessel or maybe it is just a surface model either way you will make an fea model of either with solid or shell elements then for the fluid you take the inner surface of the vessel and add end caps which both create a close surface to creat the fluid cells and also act as inlets and outlets Sent from my iPad using CFD Online Forum mobile app