Body Coupling in overset region

sjtuwjh · July 27, 2014, 10:57

Hi everyone,
I've came up with a problem when I use the body coupling spring in a two dfbi model, where one dfbi in the background region and the other in the overset region. When I use a linear spring to connect the two body, there comes the error in the calculating process. The error comes immediately when the 6dof body in the overset region releases and the error information are as follows:
Updating indirect region interface Overset Mesh 1 between Overset and Background.
Found Acceptors in Region "Overset" with zero donors . This might be due to too fine or too coarse mesh.
Command: RunSimulation
CompletedCommand: RunSimulation
error: Server Error
But when I fixed the motion of the body in the overset region, it can calculate again. I don't know how to handle with this, is there anyone who can help me solve this problem? I am looking forward to your reply.

sjtuwjh

sjtuwjh · July 28, 2014, 04:34

Another question, can one region has two dfbi? Because when use the overset mesh there comes so many problems.

July 27, 2014, 10:57	Body Coupling in overset region	#1
sjtuwjh New Member Wang Jianhua Join Date: Mar 2014 Posts: 9 Rep Power: 12	Hi everyone, I've came up with a problem when I use the body coupling spring in a two dfbi model, where one dfbi in the background region and the other in the overset region. When I use a linear spring to connect the two body, there comes the error in the calculating process. The error comes immediately when the 6dof body in the overset region releases and the error information are as follows: Updating indirect region interface Overset Mesh 1 between Overset and Background. Found Acceptors in Region "Overset" with zero donors . This might be due to too fine or too coarse mesh. Command: RunSimulation CompletedCommand: RunSimulation error: Server Error But when I fixed the motion of the body in the overset region, it can calculate again. I don't know how to handle with this, is there anyone who can help me solve this problem? I am looking forward to your reply. sjtuwjh

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Beginner questions - modelling lift and drag on a towed body	ABF	Main CFD Forum	15	October 19, 2014 23:27
Unstabil Simulation with chtMultiRegionFoam	mbay101	OpenFOAM Running, Solving & CFD	13	December 28, 2013 13:12
Heattransfer between two fluids with chtMultiRegionFoam	Black-Pearl	OpenFOAM Running, Solving & CFD	1	September 7, 2013 08:03
Extracting fluid flow region from a solid body 3D	Pradeep	Main CFD Forum	6	January 29, 2009 11:13
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

July 28, 2014, 04:34		#2
sjtuwjh New Member Wang Jianhua Join Date: Mar 2014 Posts: 9 Rep Power: 12	Another question, can one region has two dfbi? Because when use the overset mesh there comes so many problems.