|
[Sponsors] |
|
July 27, 2014, 10:57 |
Body Coupling in overset region
|
#1 |
New Member
Wang Jianhua
Join Date: Mar 2014
Posts: 9
Rep Power: 12 |
Hi everyone,
I've came up with a problem when I use the body coupling spring in a two dfbi model, where one dfbi in the background region and the other in the overset region. When I use a linear spring to connect the two body, there comes the error in the calculating process. The error comes immediately when the 6dof body in the overset region releases and the error information are as follows: Updating indirect region interface Overset Mesh 1 between Overset and Background. Found Acceptors in Region "Overset" with zero donors . This might be due to too fine or too coarse mesh. Command: RunSimulation CompletedCommand: RunSimulation error: Server Error But when I fixed the motion of the body in the overset region, it can calculate again. I don't know how to handle with this, is there anyone who can help me solve this problem? I am looking forward to your reply. sjtuwjh |
|
July 28, 2014, 04:34 |
|
#2 |
New Member
Wang Jianhua
Join Date: Mar 2014
Posts: 9
Rep Power: 12 |
Another question, can one region has two dfbi? Because when use the overset mesh there comes so many problems.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Beginner questions - modelling lift and drag on a towed body | ABF | Main CFD Forum | 15 | October 19, 2014 23:27 |
Unstabil Simulation with chtMultiRegionFoam | mbay101 | OpenFOAM Running, Solving & CFD | 13 | December 28, 2013 13:12 |
Heattransfer between two fluids with chtMultiRegionFoam | Black-Pearl | OpenFOAM Running, Solving & CFD | 1 | September 7, 2013 08:03 |
Extracting fluid flow region from a solid body 3D | Pradeep | Main CFD Forum | 6 | January 29, 2009 11:13 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |