|
[Sponsors] |
February 11, 2013, 21:45 |
Hypermesh to STAR CCM+
|
#1 |
New Member
Anup M Upadhyaya
Join Date: Feb 2013
Posts: 6
Rep Power: 13 |
I have meshed 3D model of car cabin for thermal comfort analysis using TRIA surfacemeshing in Hypermesh V11.Now i want to import it to STAR CCM+ v7. i tried using editing .hm and saving it as a .nas file and imported to STAR ccm+. i am getting error as shown below..
Nastran part import failed . elements types may not be supported or input file could be corrupted or no valid parts could be identified .please recheck the input file.no element bulk data found in file path... Anybody having solution..? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
Fluent Vs Star CCM | firda | Main CFD Forum | 3 | February 26, 2011 02:51 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |