[GAMBIT] Mesh of rotary valve

Diana.N · April 8, 2013, 10:07

Hi All,

I am new to CFD software packages, dealing with Fluent & Gambit I try to study outlet flow behavior as pulse flow in rotary valve . I make three volumes in rotary valve, first one for case, the second one for rotated cylinder and the third one for fluid. I make mesh generation for three volumes in Gambit as attached in mesh file and export the mesh file to fluent to solve the problem. during setting in fluent in boundary condition I got this note " This page is nit applicable under current settings". I have attached the files I am currently working on. ( mesh and fluent note). I need to tick but any help would be much appreciated

Regards,
Diana.N

-mAx- · April 9, 2013, 03:39

did you extract the fluid domain of your assembly? Or did you mesh the solid parts?

Diana.N · April 13, 2013, 05:42

Dear Max,

I mesh all the separated parts for solid ( valve case, rotated cylinder) and fluid as air, define the inlet and outlet nozzle as well as the solid as walls.
can you guide me please.

With regards

ghost82 · April 17, 2013, 05:19

Hi Diana,
you don't have to mesh the solid parts, unless you want to study solid-fluid heat transfer.
So remove solid parts from your geometry and retain only volumes where there is the fluid.
Surfaces in common with solid and fluid will be treated as solid walls.

Daniele

April 9, 2013, 03:39		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	did you extract the fluid domain of your assembly? Or did you mesh the solid parts? __________________ In memory of my friend Hervé: CFD engineer & freerider

April 13, 2013, 05:42	mesh generation & Pre-processing	#3
Diana.N New Member Diana Join Date: Feb 2012 Posts: 11 Rep Power: 14	Dear Max, I mesh all the separated parts for solid ( valve case, rotated cylinder) and fluid as air, define the inlet and outlet nozzle as well as the solid as walls. can you guide me please. With regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Negative volume error in hybrid mesh	siw	ANSYS Meshing & Geometry	4	September 3, 2014 05:25
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
mesh for valve in gambit	j	FLUENT	2	November 4, 2011 12:57
basic of mesh refinement	arya	CFX	4	June 19, 2007 12:21
Mesh	Mignard	FLUENT	2	March 22, 2000 05:12

April 17, 2013, 05:19		#4
ghost82 Senior Member Rick Join Date: Oct 2010 Posts: 1,016 Rep Power: 26	Hi Diana, you don't have to mesh the solid parts, unless you want to study solid-fluid heat transfer. So remove solid parts from your geometry and retain only volumes where there is the fluid. Surfaces in common with solid and fluid will be treated as solid walls. Daniele