CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

Meshing help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 22, 2013, 05:37
Default Meshing help
  #1
New Member
 
Mohammad
Join Date: Jun 2013
Posts: 7
Rep Power: 3
Mohammad80 is on a distinguished road
Hello,
The following pictures represent sample of my problem. When I want to generate mesh for the shape shown in the first picture , after a long time of meshing process I noticed that it make an attempts to generate the mesh as in the second picture, but no way!!!
then the message box shown in the last picture told me that I have to change element size or virtual topology!!!
I tried to do this and other changes..... but the problem did not solved!
Could you please help me to solve this problem?
Note that: the blade shown was drawn using airfoil and extended using sweep command.
Please contact me at my e.mail: mas20001920@yahoo.com

http://im42.gulfup.com/3SfMf.jpg
http://im42.gulfup.com/Bkecq.jpg
http://im42.gulfup.com/qpHs8.jpg
Mohammad80 is offline   Reply With Quote

Old   July 24, 2013, 08:24
Default
  #2
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 425
Rep Power: 12
vasava will become famous soon enough
You can try playing with the max and min size of the mesh. Along with this you can also try using 'proximity and curvature' option.

Are there any sharp/pointed regions in your domain? I could not see the junction of the foild and the '+' shaped objects.
vasava is offline   Reply With Quote

Old   July 24, 2013, 13:31
Default
  #3
New Member
 
Mohammad
Join Date: Jun 2013
Posts: 7
Rep Power: 3
Mohammad80 is on a distinguished road
Please vasava, could you contact me at my email address, I want to sent my geometry file to you to have a look on it.
Regards..
Mohammad80 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Can I use ANSYS Meshing for manual meshing? Kirjain ANSYS Meshing & Geometry 3 June 12, 2012 08:35
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing David-CFD ANSYS Meshing & Geometry 1 April 1, 2011 05:22
Meshing locks workbench window. andy2o CFX 0 February 1, 2008 05:01
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 11:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 11:08


All times are GMT -4. The time now is 14:06.