|
[Sponsors] |
|
June 12, 2010, 05:35 |
[ICEM] Mesh Densities and Replay Remeshing
|
#1 |
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 733
Rep Power: 25 |
Hi,
For a 3-D mesh, if a mesh density volume is created by selecting points which are part of a geometry (i.e. if a mesh density volume extends along the trailing edge of a wing and was created by selecting the points at the wing root trailing edge and the wing tip trailing edge points) and this mesh is used for a CFX + rigid body solver simulation with the ICEM Replay Remeshing feature. When the wing moves will the mesh density volume move as well so that it remains attached to the trailing edge? (I'm only considering Tetra/Prism as I don't have the Hexa licence). Thanks |
|
June 13, 2010, 22:43 |
How was it created...
|
#2 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
It depends how it was created...
If the script creates the density by selecting points and the points have moved, then the script will take the location of the new points. That should be fully script-able. However, if you do not include the creation in the script or if your creation is by XYZ location, then those will not adjust with the locations of the points as the wing moves... Simon |
|
June 14, 2010, 02:07 |
|
#3 |
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 733
Rep Power: 25 |
Thanks Simon.
|
|
|
|