|
[Sponsors] |
June 12, 2010, 05:35 |
[ICEM] Mesh Densities and Replay Remeshing
|
#1 |
Senior Member
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 735
Rep Power: 25 |
Hi,
For a 3-D mesh, if a mesh density volume is created by selecting points which are part of a geometry (i.e. if a mesh density volume extends along the trailing edge of a wing and was created by selecting the points at the wing root trailing edge and the wing tip trailing edge points) and this mesh is used for a CFX + rigid body solver simulation with the ICEM Replay Remeshing feature. When the wing moves will the mesh density volume move as well so that it remains attached to the trailing edge? (I'm only considering Tetra/Prism as I don't have the Hexa licence). Thanks |
|
|
|