CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

STAR-CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 19, 2000, 08:53
Default STAR-CD
  #1
B.N.LOO
Guest
 
Posts: n/a
Hello STAR-CD users,

Right now I'm working in Infrared supress sysstems(IRSS) using STAR-CD (v-3.10). Now I got a problem in Modelling area and boundary definitions. There are two streams are there, one is out fluid and another is inner fluid. Inner fluid has the elliptical shape(volume).

My problem is " what type of boundary should be defined in between these two fluids i.e two streams interface either wall or baffel.Because there is no flow in between them, only heat transfer is there. Please try to reply me as early as possible. Thank Q

B.N.LOO
  Reply With Quote

Old   July 20, 2000, 05:42
Default Re: STAR-CD
  #2
J. Y. Luo
Guest
 
Posts: n/a
This type of geometry is very common such as heat exchangers. If the "solid" between the two fluids is very thin in your case, you can treat it as conducting baffle. Otherwise, it can be treated as solid and you can run the case as conjugate heat transfer.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah CD-adapco 4 March 6, 2009 07:22
Star Design to Star-CD(Prostar) AB CD-adapco 5 October 28, 2004 12:21


All times are GMT -4. The time now is 14:35.