CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

monitoring cell

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 3, 2004, 22:09
Default monitoring cell
  #1
Jane
Guest
 
Posts: n/a
Dear everyone!

when i calculate some problem , as you know, we must set a monitoring cell where we want to see the change of value, and we can see the values of monitoring cell in run file. but it is strange, in the post course if i just put the monitoring cell in cset. then the value showed in contour plot is same as value showed in run file( for example temperature), but if i put many cell including the monitoring cell in the cset, and see the contour plot of temperature in these cell. it is showed value of the monitoring cell is very diffirent from it is in run file. why ? and what is the reference cell used to?

thank you

best regards

Jane
  Reply With Quote

Old   March 4, 2004, 07:42
Default Re: monitoring cell
  #2
John
Guest
 
Posts: n/a
It should be the same - can you use PCRO command in prostar and then click on the cell you are interested in and it should print out the exact value for you.
  Reply With Quote

Old   March 4, 2004, 22:01
Default Re: monitoring cell
  #3
Jane
Guest
 
Posts: n/a
thank you, Jone!

i got it

Jane
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
what about monitoring cell in prostar kathir Siemens 1 July 20, 2006 07:20
What is Monitoring cell? Tipakorn Siemens 2 March 28, 2006 21:38
CPU Monitoring Bob FLUENT 2 June 2, 2004 19:51
Cell-vertex and cell-centered finite volume method Praveen Main CFD Forum 4 September 9, 2003 00:58
monitoring neil FLUENT 1 March 4, 2003 00:35


All times are GMT -4. The time now is 23:25.