CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Downstream droplet size data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 8, 2004, 06:59
Default Downstream droplet size data
  #1
Nick
Guest
 
Posts: n/a
Im trying to extract droplet size data at three downstream locations in a simulation. Does anyone know how to do this? (or if it is possible)
  Reply With Quote

Old   December 11, 2004, 19:17
Default Re: Downstream droplet size data
  #2
Mike
Guest
 
Posts: n/a
You should try using the user subroutine dravrg.

This subroutine will be called as the Lagrangian tracking progresses, at each step. Be careful not to doublecount parcels. It takes some thoughtful logic to avoid doublecounting.

Alternatively, user support can supply you with a separate code to give you direct access to the track file. From that file you could parse through all the parcels and note their size and count at the locations of interest, and perhaps write these into a log file.

I can get you the program that reads the track file if needed. It works under Linux and possibly other platforms. Just send me an e-mail - mhenneke@adapco.com
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
first wall layer thickness and droplet size itchie CFX 3 May 14, 2008 09:03
Importance of droplet size Itchie CFX 2 December 13, 2007 03:01
droplet size Neser CFX 1 January 26, 2004 14:42
Automatical resizeure of droplet plot size Marc CD-adapco 0 June 7, 2002 06:08
Initial droplet size distribution Ossi Kaario CD-adapco 2 March 13, 2001 13:19


All times are GMT -4. The time now is 10:56.