CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

"edge on" results in shut down the star cd ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 8, 2006, 12:55
Default "edge on" results in shut down the star cd ?
  #1
nijajo
Guest
 
Posts: n/a
here I import the model form gambit. After "edge on" the cell set , "star cd" shut down immediately.so how can i do ? Is the memory not enough ?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import STAR-CD results -> Paraview BenBoo CD-adapco 7 March 29, 2012 05:02
Results compare Star cd V4.06 and 3.26 Andrea CD-adapco 2 November 11, 2008 04:03
Getting Star-CCM+ results to tecplot 360 Nathan CD-adapco 2 October 13, 2007 12:40
Solid Edge to Star-CCM+ James CD-adapco 3 November 1, 2006 09:02
Exporting results from Star to Ensight AJK CD-adapco 1 February 8, 2006 04:53


All times are GMT -4. The time now is 23:37.