CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Meshing in Pro-Star

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 4, 2007, 06:13
Default Meshing in Pro-Star
  #1
usker
Guest
 
Posts: n/a
Hello everybody! I am doing analysis on Roller Vane Pump. The size of the gap between the vane and the stator in the most narrow region is 0.05mm. Do you think it is possible to create mesh that small in pro-star or pro-amm?

Thanks a lot
  Reply With Quote

Old   April 4, 2007, 16:01
Default Re: Meshing in Pro-Star
  #2
Balduin Bankerotti
Guest
 
Posts: n/a
Where should be the problem?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trimmer meshing model STAR-CCM+ rH CD-adapco 3 December 17, 2008 17:16
multi-region volume meshing on star ccm+ Mike CD-adapco 6 November 13, 2006 11:36
Meshing of imported 2-D CAD geometry in STAR-CD Haris Maharana CD-adapco 1 June 30, 2000 13:48


All times are GMT -4. The time now is 20:40.