|
[Sponsors] |
October 10, 2014, 11:10 |
Looking for help in Minneapolis area
|
#1 |
New Member
Peter Gobar
Join Date: Sep 2014
Posts: 3
Rep Power: 11 |
Hello, I am looking for help with a CFD project in the Minneapolis area.
I am looking for someone who is knowledgeable enough about CFD and related concepts to help me with a novel high-lift airfoil array utilizing boundary layer control with compressible flow. I do not need it designed. I need to be able to validate the design I have; I have it set up, using Caedium, which utilizes OpenFOAM, but am struggling with the following: 1) Convergence 2) Determining turbulent length scale 3) Time step selection 4) Etc. As such, I need knowledgeable review of all simulation parameters for purposes of optimizing the simulation convergence and simulation reliability This is for a proprietary project, so whoever helps will need to sign a non-disclosure/protected information agreement. Also, if a graduate student can help me, then a graduate student is fine for the job. Thanks! My email is pgobar at mac dot com |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with reference area | alfaben | STAR-CCM+ | 3 | April 21, 2020 09:46 |
[OpenFOAM] Problem with cell area calculation in a slice | daniel87 | ParaView | 5 | October 24, 2015 16:18 |
Non overlap area fractions | saisanthoshm88 | CFX | 11 | September 17, 2015 18:42 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
CFX Solver Memory Error | mike | CFX | 1 | March 19, 2008 07:22 |