|
[Sponsors] |
October 10, 2014, 11:10 |
Looking for help in Minneapolis area
|
#1 |
New Member
Peter Gobar
Join Date: Sep 2014
Posts: 3
Rep Power: 11 |
Hello, I am looking for help with a CFD project in the Minneapolis area.
I am looking for someone who is knowledgeable enough about CFD and related concepts to help me with a novel high-lift airfoil array utilizing boundary layer control with compressible flow. I do not need it designed. I need to be able to validate the design I have; I have it set up, using Caedium, which utilizes OpenFOAM, but am struggling with the following: 1) Convergence 2) Determining turbulent length scale 3) Time step selection 4) Etc. As such, I need knowledgeable review of all simulation parameters for purposes of optimizing the simulation convergence and simulation reliability This is for a proprietary project, so whoever helps will need to sign a non-disclosure/protected information agreement. Also, if a graduate student can help me, then a graduate student is fine for the job. Thanks! My email is pgobar at mac dot com |
|
November 26, 2014, 09:31 |
|
#2 |
Member
Mehul Patel - CFD Expert
Join Date: Jul 2013
Location: Ahmedabad
Posts: 41
Rep Power: 12 |
Hello Peter,
Please send us your detail requirements so on the basis of that one of our sales executive will get in touch with you. Our company HiTechCFD.com provides precise CFD analysis services to global customers. For more information, please visit http://www.hitechcfd.com/ If you have any queries, please let us know. Thank you, Radhika Rathod |
|
November 30, 2014, 17:42 |
|
#3 |
New Member
Peter Gobar
Join Date: Sep 2014
Posts: 3
Rep Power: 11 |
Thank you, I will do that.
Peter Gobar |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with reference area | alfaben | STAR-CCM+ | 3 | April 21, 2020 09:46 |
[OpenFOAM] Problem with cell area calculation in a slice | daniel87 | ParaView | 5 | October 24, 2015 16:18 |
Non overlap area fractions | saisanthoshm88 | CFX | 11 | September 17, 2015 18:42 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
CFX Solver Memory Error | mike | CFX | 1 | March 19, 2008 07:22 |