CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

result file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 29, 2007, 12:26
Default result file
  #1
Emre
Guest
 
Posts: n/a
Hi, I am having problem with the results file. Here is the thing, I am running my simulation on a UNIX system with commands without using a GUI. However, the simulation does NOT create a result file in each iteration whereas it was creating when i was running the simulation in my computer (on Windows) via GUI. While the options are same, why can't I get res files in each iteration? What do I need to do for this? Thnx for your concern.
  Reply With Quote

Old   October 29, 2007, 18:33
Default Re: result file
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

This is set in the CCL. Check that you are defining writing a file every iteration in the CCL or in CFX-Pre.

Glenn Horrocks
  Reply With Quote

Old   October 30, 2007, 07:36
Default Re: result file
  #3
Emre
Guest
 
Posts: n/a
The simulation in UNIX only needs the .def file to start. The ccl file is created by itself after the simulation gets start. Thus, it seems I can only define writing a file in CFX-Pre. However, I do not know how to do this particularly in CFX-Pre. Also, it writes a .res file in after each iteration by itself when I run the simulation in Windows.
  Reply With Quote

Old   October 30, 2007, 19:03
Default Re: result file
  #4
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

CFX operates the same way in Windows, Linux and UNIX. There is nothing special about the UNIX setup.

The CCL is contained in the def file. CFX-Pre writes the CCL depending on the options you choose. Check the output options in CFX-Pre and check you have set it to write the output file when you want them.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
openfoam 1.6 on debian etch romant OpenFOAM Installation 9 May 6, 2010 02:26
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
Compiling gmshFoam with OpenFOAM-1.5 BlGene Open Source Meshers: Gmsh, Netgen, CGNS, ... 10 August 6, 2009 04:26
PHI file structure Eugene Phoenics 9 November 2, 2001 23:00


All times are GMT -4. The time now is 22:47.