CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

structured meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 15, 2002, 04:19
Default structured meshing
  #1
Mavinakere
Guest
 
Posts: n/a
Hi, how can one create Structured Quadrilateral Grid,Multiblock Structured Quadrilateral Grid,O-Type Structured Quadrilateral Grid,C-Type Structured Quadrilateral Grid as shown in the figures of FLUENT guide (chapter 5.1,grid topologies)using GAMBIT.Can anybody say where can i find tutorials to make such meshes.GAMBIT meshing tutorials did not give me enough ideas to do this.thanks for any help. Mavinakere.
  Reply With Quote

Old   February 25, 2002, 10:57
Default Re: structured meshing
  #2
lei zhou
Guest
 
Posts: n/a
Hi, you can do this by choose "mapping scheme" option when you try to generate face mesh(or 3d volume mesh),and you can obtain a structured mesh which is writed in unstructured manner, then you can convert such mesh into general structured mesh by writing a small converting program.
  Reply With Quote

Old   February 25, 2002, 13:04
Default Re: structured meshing
  #3
Mavinakere
Guest
 
Posts: n/a
Hi,yes i did obtain a structured mesh which is writed in unstructured manner..now what kind of converting program should i write ..please give me more insight. Thanks.Mavinakere.
  Reply With Quote

Old   March 1, 2002, 07:20
Default Re: structured meshing
  #4
lei zhou
Guest
 
Posts: n/a
I have writen two codes to convert unstructured surface mesh and unstructured volume mesh into structured meshes, this work toke me four days.

From Gambit, you can save mesh data (coordinate data and connection data) of any volume into a "trn" file by enquiring the mesh data information,right?

then you can obtain a data file recording mesh data of the unstructured surface (or volume) mesh.

After that, you can convert this data file into structured mesh data file by using my converter program.

I wonder if you will accept my two exe file by your e-mail address?
  Reply With Quote

Old   March 1, 2002, 16:52
Default Re: structured meshing
  #5
Mavinakere
Guest
 
Posts: n/a
Hi, if the exe files are not big i,e more than 1.5mb would be difficult in my mailbox.if it is less..plz send me..if it not still you can send in this mail id:mavinker@mech.uta.edu thank you.mavinakere.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
Structured meshing in Gmsh the_phew Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 September 18, 2011 07:44
ANSYS Meshing: Structured Mesh with Inflation Antanas ANSYS Meshing & Geometry 1 June 18, 2011 20:23
3D wing + wind tunnel hexa structured meshing icemaniac178 ANSYS Meshing & Geometry 9 October 28, 2010 09:37
Flovent meshing - structured cartesian okay? Josh Kjenner Main CFD Forum 1 January 12, 2008 00:06


All times are GMT -4. The time now is 03:40.