CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Inquire adjacent threads error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 16, 2002, 15:26
Default Inquire adjacent threads error
  #1
Rupp Carriveau
Guest
 
Posts: n/a
I have a simple laminar model created in Gambit v2.0 and Fluent v6.0.12. Its only unique features are a sizing function for the volume mesh and a spinning solid disk in water that requires a grid interface. Fluent accepts my .msh from Gambit happily, then runs the model and converges with what seems to be decent results. I then save both .cas and .dat files. When I attempt to reload them to make adjustments to the model, Fluent reads everything in then rejects it saying, "Error: Inquire-adjacent-threads: wrong type argument[1] (thread)" and, "Error Object: 0"

Has anyone seen these errors, and if so, knows how to deal with them?

Thanks for your time,

Rupp.
  Reply With Quote

Old   September 19, 2002, 08:55
Default Re: Inquire adjacent threads error
  #2
Chandan Sarkar
Guest
 
Posts: n/a
I don't know about your geometry. Might be problem is in your creating of geometry i.e. the meshing is not continuous. u can check by creating external or internal b.l. as required in junction of two vol.s
  Reply With Quote

Old   February 8, 2015, 12:16
Default
  #3
New Member
 
Gustaw Cegielski
Join Date: Dec 2014
Posts: 8
Rep Power: 2
Goodstuff is on a distinguished road
I know that this post was published long ago, but it's the only one regarding this error. Anyway, in my case I had to supress contact connections (I did it in Ansys Meshing), so if anyone has this problem, I can recommend trying that.
Goodstuff is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CGNS Compiling Diego Main CFD Forum 17 December 21, 2014 02:40
Compile problem ivanyao OpenFOAM Running, Solving & CFD 1 October 12, 2012 09:31
Accessing phi from a fvPatchField at same patch johndeas OpenFOAM 1 September 13, 2010 20:23
POSDAT problem piotka STAR-CD 4 June 12, 2009 08:43
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 20:50


All times are GMT -4. The time now is 22:39.