CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Mesh in Gambit/Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 24, 2006, 05:43
Default Mesh in Gambit/Fluent
  #1
Mark
Guest
 
Posts: n/a
Hi to everybody! I know that Gambit can mesh .igs files . (I'm realizing a project I will save in .igs ) The mesh generated by Gambit (e.g. saved in .msh format) can be used in Fluent and other programs similar to Fluent. I need to have only the mesh file (.msh without inlet/outlet conditions) outputted by Gambit... but I use Gambit very little and I'm not able to solve some problems given by Gambit about 2 surfraces... So.. I'm looking for someone who could make the gambit meshes for me.. I think it will be very quick to do for anybody who use Gambit everyday...
  Reply With Quote

Old   June 25, 2006, 06:23
Default Re: Mesh in Gambit/Fluent
  #2
sam
Guest
 
Posts: n/a
sure . send me ur files .

i will certaily help u

ragard sam
  Reply With Quote

Old   June 26, 2006, 03:33
Default Re: Mesh in Gambit/Fluent
  #3
Durgendra
Guest
 
Posts: n/a
u can send me ur .igs files. I'll try it
  Reply With Quote

Old   June 27, 2006, 05:20
Default Re: Mesh in Gambit/Fluent
  #4
Mark
Guest
 
Posts: n/a
Wonderful!!!!! At this moment I'm away from my house(and my PC) because of work.. I'll be back tomorrow (28th of June) and I'll send you the critical .igs !!! Thanks!!!!!!!!!! Have a nice day!
  Reply With Quote

Old   June 27, 2006, 05:23
Default Re: Mesh in Gambit/Fluent
  #5
Mark
Guest
 
Posts: n/a
Great!!!!! Now I'm away for work, but I'll be back tomorrow (28th of June) and I'll send you the critical .igs !!! Thanks!!!!!!!!!! Regards!
  Reply With Quote

Old   June 28, 2006, 07:49
Default Re: Mesh in Gambit/Fluent
  #6
Mark
Guest
 
Posts: n/a
Hi Sam! I'm sending you a link where you can download a .zip file called Meshing-Problems.zip !

Available links: http://www.megaupload.com/?d=0ZKWO70A http://www.megaupload.com/it/?d=0ZKWO70A

You only have to go in the upper-right of the page (near MEGAUPLOADS writing), insert tre shown letters and wait 45 seconds in order to download the .zip !

In the .zip you find two .igs files: - Assembly_(Threaded).igs - Problematic-Component_(Enlarged).igs

Great if you will mesh the assembly! But Corpo.igs colud be sufficient for my puropse!

They aren't the final version of my project.. if you succeed in meshing, can you also mesh the final .igs version (when I complete it)?

If you can't download them, please send your email address to me at markchat5@libero.it and I'll send you everything!

Thankx a lot!!!!!!!!!!!!!!
  Reply With Quote

Old   June 28, 2006, 07:50
Default Re: Mesh in Gambit/Fluent
  #7
Mark
Guest
 
Posts: n/a
Hi Durgendra! I'm sending you a link where you can download a .zip file called Meshing-Problems.zip !

Available links: http://www.megaupload.com/?d=0ZKWO70A http://www.megaupload.com/it/?d=0ZKWO70A

You only have to go in the upper-right of the page (near MEGAUPLOADS writing), insert tre shown letters and wait 45 seconds in order to download the .zip !

In the .zip you find two .igs files: - Assembly_(Threaded).igs - Problematic-Component_(Enlarged).igs

Great if you will mesh the assembly! But Corpo.igs colud be sufficient for my puropse!

They aren't the final version of my project.. if you succeed in meshing, can you also mesh the final .igs version (when I complete it)?

If you can't download them, please send your email address to me at markchat5@libero.it and I'll send you everything!

Thankx a lot!!!!!!!!!!!!!!
  Reply With Quote

Old   July 9, 2006, 02:00
Default Re: Mesh in Gambit/Fluent
  #8
behnam
Guest
 
Posts: n/a
Hi i need a steam reforming reactor mesh for fluent with catalyst particle
  Reply With Quote

Old   July 19, 2006, 16:37
Default Re: Mesh in Gambit/Fluent
  #9
J.Gimbun
Guest
 
Posts: n/a
You can draw & mesh the reactor, then either patch the catalyst partice loading like in fluidised bed if I'm right.
  Reply With Quote

Old   July 29, 2006, 09:43
Default Re: Mesh in Gambit/Fluent
  #10
behnam
Guest
 
Posts: n/a
i need a mesh of fixed bed reactor with catalyst partice for steam reforming conversion. thank you.
  Reply With Quote

Old   July 29, 2006, 16:19
Default Re: Mesh in Gambit/Fluent
  #11
J.Gimbun
Guest
 
Posts: n/a
I'm not doing a fluidised bed or packed bed simulation. Anyway, I suppose you can do it by adding a reaction (via species modelling) on fluidised bed case. Another idea might be by assuming the bed as a porous media. The second idea shouldn't be accurate but it does simplify your problem (maybe). Fluidised bed tutorial is available in Fluent user or in Fluent help. Good luck.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 05:25
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 03:52
non-smooth mesh Svensson OpenFOAM Native Meshers: snappyHexMesh and Others 11 January 18, 2012 09:13
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 04:49
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55


All times are GMT -4. The time now is 14:37.