|
[Sponsors] |
August 12, 2013, 15:05 |
Help post processing Fleunt
|
#1 |
Member
rayan
Join Date: Jun 2013
Posts: 65
Rep Power: 12 |
there is anyone who could help me to represent my result as is present on the site of ANSYS (you go to the site Ansys (http://www.ansys.com/Products/Simula...YS+Fluent#/0/3) then click on the "Examples" menu on the left then choose "jet in cross flow") please if anyone has any help I really need I have an almost identical simulation
|
|
August 12, 2013, 15:42 |
|
#2 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,399
Rep Power: 46 |
||
August 12, 2013, 15:57 |
|
#3 |
Member
rayan
Join Date: Jun 2013
Posts: 65
Rep Power: 12 |
Thanks Ales for your replay,
This is the distribution of temperature fields in the box (starting from inlet to outlet) I want to make a video of the temperature distribution in the box (the simulation is in steady mode), do you have an idea please |
|
August 12, 2013, 16:02 |
|
#4 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,399
Rep Power: 46 |
A video of a steady-state simulation? I dont know how to do this and why. Sorry.
|
|
August 12, 2013, 16:14 |
|
#5 |
Member
rayan
Join Date: Jun 2013
Posts: 65
Rep Power: 12 |
yes a video of a steady simulation its strange but it exists but i don't now how i can do it
Thanks Alex, if you have an idea do not hesitate to post it |
|
August 13, 2013, 07:00 |
|
#6 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,399
Rep Power: 46 |
Under "Calculation activities" you can set up "solution animations".
Then after solving, you can save a movie or a picture sequence under "graphics and animations" -> "solution animation playback". It seem a bit tricky at least without consulting the manual, but it gets the job done. |
|
August 13, 2013, 13:42 |
|
#7 |
Member
rayan
Join Date: Jun 2013
Posts: 65
Rep Power: 12 |
Thank you Alex for your suggestion, I'll try your suggestion and get back here
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Automated post processing using CFD Post | shreyasr | ANSYS | 0 | January 28, 2013 06:21 |
Ansys Post processing | ano999 | ANSYS | 1 | May 27, 2011 16:24 |
NO model vs post processing in coal combustion,CFX | sakalido | CFX | 1 | April 15, 2011 14:07 |
post processing for KIVA | dirga | Main CFD Forum | 5 | April 23, 2009 10:58 |
Post Processing in FEM | Abhijit Tilak | Main CFD Forum | 0 | April 26, 2004 11:59 |