|
[Sponsors] |
December 14, 1998, 11:50 |
STAR-CD Users
|
#1 |
Guest
Posts: n/a
|
Hello,
I am a PhD student in Nantes (Ouest of France) and I use STAR-CD to simulate the laminar viscous flow past a circular cylinder in both confined and infinite medium. I am looking for STAR-CD users all around the world in order to exchange our experiences using this CFD. Looking to hear from you soon, Sincerly Yours, Mohamed. E-mail : guerou@isitem.univ-nantes.fr |
|
December 21, 1998, 04:33 |
Re: STAR-CD Users
|
#2 |
Guest
Posts: n/a
|
Hi Mohamed,
I am more or less doing the same as you, except I based my PhD on bluff bodies (mainly the square cylinder) in highly turbulent flows. The CFD calculations are done with Star-CD. My aim is to compute the unsteady forces, as input to an aero-acoustic calculation. Regards, -- Brian Mr. Brian O. Olsen ISVR, University of Southampton, UK Email : ottar@isvr.soton.ac.uk |
|
December 31, 1998, 23:44 |
Re: STAR-CD Users
|
#3 |
Guest
Posts: n/a
|
Gentlemen,
I have been using STAR*CD for many years and am always looking for other advanced users to exchange ideas, knowledge and experiences. Feel free to e-mail me directly. Andrew |
|
January 5, 1999, 11:03 |
Re: STAR-CD Users
|
#4 |
Guest
Posts: n/a
|
I have been using STAR-CD and other commercial CFd codes for number of years, and would be happy to exchange ideas.
Best regards, Roy 518-387-5928 |
|
January 5, 1999, 11:32 |
Re: STAR-CD Users
|
#5 |
Guest
Posts: n/a
|
I am a StarCD user as well.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
500 registered CFD-Wiki users | Jonas Larsson | CFD-Wiki | 4 | December 9, 2005 11:02 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
Fluent 5.5. What the differences with fluent 5.3?? | confused | FLUENT | 2 | July 29, 2001 21:58 |
2000 North American STAR-CD Users Conference | Andrew Robertson | Siemens | 0 | March 31, 2000 18:18 |