A few questions about Gmsh: Background Mesh and Tutorial 7

SeanQuallen · August 22, 2015, 11:30

Hello all!

I'm learning how to use Gmsh by going through the tutorials they've provided. However I've come to tutorial number 7 (t7) and am now stuck at the 'background mesh'. Here are a few questions, if one of you would be so kind as to help out:

First, what is a background mesh, anyway? There's no definitive answer to this that I've been able to find. It looks to be some pre-defined field that somehow gets interpolated into my mesh-space (??), but I have no real clear idea as to its concept and purpose.
Second, has anyone run this tutorial 7 provided by Gmsh? It's only 3 lines and the final line sets up a background mesh view. Am I supposed to continue on with that? Is that supposed to provide a mesh for me? The program hangs when I attempt to mesh 2d so I'm assuming something has not worked.

I'd appreciate any help offered to these questions! Thanks!

Sean

SeanQuallen · August 23, 2015, 14:31

Sorry all, it was user failure. The smoothing steps option had accidentally been set to a very high value. Deleting it from my .gmsh-options solved that.

NEEL8007 · November 27, 2017, 03:28

i did terahedral but i want regular hexahedral meshing code

August 22, 2015, 11:30	A few questions about Gmsh: Background Mesh and Tutorial 7	#1
SeanQuallen New Member Sean Quallen Join Date: Dec 2011 Posts: 9 Rep Power: 14	Hello all! I'm learning how to use Gmsh by going through the tutorials they've provided. However I've come to tutorial number 7 (t7) and am now stuck at the 'background mesh'. Here are a few questions, if one of you would be so kind as to help out: First, what is a background mesh, anyway? There's no definitive answer to this that I've been able to find. It looks to be some pre-defined field that somehow gets interpolated into my mesh-space (??), but I have no real clear idea as to its concept and purpose. Second, has anyone run this tutorial 7 provided by Gmsh? It's only 3 lines and the final line sets up a background mesh view. Am I supposed to continue on with that? Is that supposed to provide a mesh for me? The program hangs when I attempt to mesh 2d so I'm assuming something has not worked. I'd appreciate any help offered to these questions! Thanks! Sean

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 06:42
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[Gmsh] Scripted version of "2D Mesh Generation Tutorial for GMSH"	laubeg	OpenFOAM Meshing & Mesh Conversion	1	April 14, 2013 08:32
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[Gmsh] gmshToFoam problem: not the same mesh in Gmsh vs. paraview	zhernadi	OpenFOAM Meshing & Mesh Conversion	8	July 7, 2011 02:28

August 23, 2015, 14:31		#2
SeanQuallen New Member Sean Quallen Join Date: Dec 2011 Posts: 9 Rep Power: 14	Sorry all, it was user failure. The smoothing steps option had accidentally been set to a very high value. Deleting it from my .gmsh-options solved that.