|
[Sponsors] |
[snappyHexMesh] Can Snappyhexmesh work with Prism cells? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 19, 2015, 05:16 |
Can Snappyhexmesh work with Prism cells?
|
#1 |
Member
Vineet Bhola
Join Date: Jun 2015
Location: Chemnitz, Germany
Posts: 49
Rep Power: 10 |
Hi All,
I have always worked with snappyhexmesh alongwith blockmesh containing only hexahedral cells. But one of the demand that has come up from a customer is if I could use Prism cells instead of hex cells. My concerns are: 1. I saw on OPENFOAM user guide that instead of hex keyword, if I use prism, I can have prismatic cells. But my concern is that then the box itself would be a prism. I want to know if it is possible to have a cuboid as box and prism cells inside. 2. Suppose I find a solution to the first concern, is it then possible to work with prism cells in Snappyhexmesh? What parameters do I need to change for that? Thanks, Vneet |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh sticking point | natty_king | OpenFOAM Meshing & Mesh Conversion | 11 | February 20, 2024 09:12 |
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops | avinashjagdale | OpenFOAM Meshing & Mesh Conversion | 53 | March 8, 2019 09:42 |
Problem with divergence | TDK | FLUENT | 13 | December 14, 2018 06:00 |
[snappyHexMesh] Problem: after snappyHexMesh, the cells size are not the same | kanes | OpenFOAM Meshing & Mesh Conversion | 0 | January 25, 2016 08:06 |
[snappyHexMesh] snappyHexMesh aborting | Tobi | OpenFOAM Meshing & Mesh Conversion | 0 | November 10, 2010 03:23 |