[OpenFOAM] Paraview not working correctly

AlexKam · August 27, 2015, 08:38

Hi there,

I've been using Parafoam 3.1.2 on Ubuntu 12.04 with OpenFOAM 2.2.0 for a weeks now with no issues - however for some reason when I try opening a case I know get an error message popping up that says the following:

Code:

alexei@alexei-OptiPlex-9010:~/OpenFOAM/alexei-2.2.0/whirl_0.05r_0.01in_3.0w$ paraFoam
created temporary 'whirl_0.05r_0.01in_3.0w.OpenFOAM'
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action 
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action

Paraview still opens however there seems to be important variables missing from my results.
I had a similar issue a few weeks ago that somehow resolved itself - however I urgently need to check my results and am hoping someone could give an explanation and/or solution to the issue.

Kind Regards,
Alexei

wyldckat · August 30, 2015, 18:28

Quick answer: There seems to be a conflict with a new Qt version being installed in your system.
You can try using the internal reader:

Code:

paraFoam -builtin

More details: http://openfoamwiki.net/index.php/FA...er_in_ParaView

August 30, 2015, 18:28		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Quick answer: There seems to be a conflict with a new Qt version being installed in your system. You can try using the internal reader: Code: paraFoam -builtin More details: http://openfoamwiki.net/index.php/FA...er_in_ParaView

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] The Inlet boundary conditions are not correctly shown in paraView	upuli	ParaView	2	July 23, 2018 23:01
Sample not working correctly	sihaqqi	OpenFOAM Running, Solving & CFD	1	July 12, 2014 01:36
[OpenFOAM] No eye icon when using ParaView with OpenFOAM	rmvega	ParaView	0	July 2, 2014 09:59
working with paraview	gandesk	OpenFOAM	0	November 19, 2010 11:48
not sure my boundaires are working correctly	mbeals	FLUENT	1	May 13, 2009 16:28