Need someone who can help me by installing FOAM

masterriemi1702 · November 9, 2009, 04:48

Hallo Community.

I want to install OpenFOAM with ParaView, but it does not work.
So i need somebody who can tell me, how i can install it.
If used the instruktions from the OpenFoam Wiki but nothing works :-(.

Can somebody help me in german or english ?

Thanks masterriemi1702

phsieh2005 · November 9, 2009, 08:33

Hi,

Which OS you are trying to install OpenFOAM on? If you use OpenSUSE, then, it is quite stright foreward.

Pei

masterriemi1702 · November 9, 2009, 08:37

Hi. I'm use Ubuntu 9.10. 32bit mode

phsieh2005 · November 9, 2009, 09:38

Hi,

Sorry, I do not use Ubuntu. But, I remember that there are a couple of threads on installing OpenFOAM on Ubuntu. Did you do a search on that topic?

Pei

akidess · November 9, 2009, 14:08

Did you try using the cookbook? There have been mixed results with 9.10, but it might work for you. Otherwise I recommend using an older ubuntu version, as the cookbook works very reliable with those.

kumar · November 10, 2009, 03:59

hello ,
I recently installed OpenFoam-1.6.x on Ubuntu 8.04 32 bit version using the cook book given on
http://www.cfd-online.com/Forums/ope...-cookbook.html

I think there should be no problem in installing on Ubuntu 9.04.Just copy the contents of the script and put it in a file and then make the file executable. Also install apt, sudo and git before you run the script.

I assume that you are familiar with Linux, if you have any problems in doing this let me know.

Another important thing is in my case the Pv3FoamReader gave an error and my compilation was not succesful so i compiled the Pv3FoamReader and paraview sepeartely as explained in the OpenFoam website

bye
K.Suresh kumar

masterriemi1702 · November 10, 2009, 04:08

I Have fixed ma problem. I have edit the bashrc in the OpenFORM directory. But you have to edit the .bashhrc in your home directory.

Everything works fine.

Thanks to all !

November 9, 2009, 04:48	Need sombody who can help me by installing FOAM	#1
masterriemi1702 New Member no Join Date: Nov 2009 Posts: 3 Rep Power: 16	Hallo Community. I want to install OpenFOAM with ParaView, but it does not work. So i need somebody who can tell me, how i can install it. If used the instruktions from the OpenFoam Wiki but nothing works :-(. Can somebody help me in german or english ? Thanks masterriemi1702 Last edited by masterriemi1702; November 9, 2009 at 05:16.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[CGNS] CGNS converters available	mbeaudoin	OpenFOAM Meshing & Mesh Conversion	137	December 14, 2018 04:20
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00
[Gmsh] Import gmsh msh to Foam	adorean	OpenFOAM Meshing & Mesh Conversion	24	April 27, 2005 08:19

November 9, 2009, 08:33		#2
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 18	Hi, Which OS you are trying to install OpenFOAM on? If you use OpenSUSE, then, it is quite stright foreward. Pei

November 9, 2009, 08:37		#3
masterriemi1702 New Member no Join Date: Nov 2009 Posts: 3 Rep Power: 16	Hi. I'm use Ubuntu 9.10. 32bit mode

November 9, 2009, 09:38		#4
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 18	Hi, Sorry, I do not use Ubuntu. But, I remember that there are a couple of threads on installing OpenFOAM on Ubuntu. Did you do a search on that topic? Pei

November 9, 2009, 14:08		#5
akidess Senior Member Anton Kidess Join Date: May 2009 Location: Germany Posts: 1,377 Rep Power: 29	Did you try using the cookbook? There have been mixed results with 9.10, but it might work for you. Otherwise I recommend using an older ubuntu version, as the cookbook works very reliable with those.

November 10, 2009, 03:59		#6
kumar Senior Member Suresh kumar Kannan Join Date: Mar 2009 Location: Luxembourg, Luxembourg, Luxembourg Posts: 129 Rep Power: 17	hello , I recently installed OpenFoam-1.6.x on Ubuntu 8.04 32 bit version using the cook book given on http://www.cfd-online.com/Forums/ope...-cookbook.html I think there should be no problem in installing on Ubuntu 9.04.Just copy the contents of the script and put it in a file and then make the file executable. Also install apt, sudo and git before you run the script. I assume that you are familiar with Linux, if you have any problems in doing this let me know. Another important thing is in my case the Pv3FoamReader gave an error and my compilation was not succesful so i compiled the Pv3FoamReader and paraview sepeartely as explained in the OpenFoam website bye K.Suresh kumar

November 10, 2009, 04:08		#7
masterriemi1702 New Member no Join Date: Nov 2009 Posts: 3 Rep Power: 16	I Have fixed ma problem. I have edit the bashrc in the OpenFORM directory. But you have to edit the .bashhrc in your home directory. Everything works fine. Thanks to all !