CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

Carbon Monoxide Sources

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By Mike Malin

Reply
 
LinkBack Thread Tools Display Modes
Old   August 16, 2001, 20:39
Default Carbon Monoxide Sources
  #1
leon
Guest
 
Posts: n/a
I am trying to model a carpark and I need to model a carbon monoxide source. I am trying see if anyone can help me with 1. Setting up of such a source in Phoenics 3.3 2. Any information on carbon monoxide production by cars.

Thanks for your help.

  Reply With Quote

Old   August 17, 2001, 06:40
Default Re: Carbon Monoxide Sources
  #2
Mike Malin
Guest
 
Posts: n/a
1) Select a PHOENICS scalar variable, say C1, to solve for the mass fraction of the pollutant. Then specify by means of a fixed-flux of C1 the rate of pollutant emission at the source.

If the magnitude of emission rate is significant compared to the air flow rates, then set the mass inflow rate for the emission in the continuity equation (P1) and set the incoming value of C1 equal to unity.

2) Consult car manufacturer's data or data from motoring organisations to estimate an average fuel consumption rate for cars moving at low speeds. From knowledge of the fuel consumption, the mass fraction of any exhaust component must be known as a fraction of the fuel consumed by reference to engineering books dealing with the combustion of liquid fuels.

ask123 likes this.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unburned carbon in ash wangyijiji FLUENT 0 November 21, 2008 08:58
Ash/Carbon Content michael FLUENT 0 October 21, 2007 15:33
Carbon material Absorption Coefficient CFDtoy Main CFD Forum 0 January 12, 2007 11:33
combustion of carbon and steel kimej FLUENT 2 July 21, 2004 14:36
Porous Carbon Tube Jay FLUENT 1 October 12, 2003 18:17


All times are GMT -4. The time now is 15:37.