CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

Residuals values

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 11, 2006, 18:04
Default Residuals values
  #1
Sileno
Guest
 
Posts: n/a
I am having some troubles in reading correctly the residuals values of the simulations. I have read in some articles that the convergence of a given simulation is obtained when the normalized residuals are smaller than E-03.

Where can I read these values from my simulations?

Thanks.

  Reply With Quote

Old   October 31, 2006, 06:27
Default Re: Residuals values
  #2
Jeremy
Guest
 
Posts: n/a
For a 2D single-phase flow, near the bottom of the RESULT file you will find the following normalised residuals printout for the last sweep:

Whole-field residuals before solution with resref values determined by EARTH & resfac= 1.000E-03 variable resref (res sum)/resref

P1 3.718E-09 1.562E+00

V1 7.078E-11 1.819E+02

W1 1.880E-08 6.684E-01

H1 8.555E-03 4.698E-01

MIXF 1.317E-10 5.908E-01

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ensight - node values -cell values leo FLUENT 1 May 12, 2010 08:47
Residuals maka OpenFOAM Bugs 0 August 4, 2008 14:07
Residuals again Elbornin FLUENT 0 January 26, 2007 15:00
node values or cell values? aPpA FLUENT 0 November 10, 2006 09:56
Residuals Rakib FLUENT 19 January 19, 2001 16:57


All times are GMT -4. The time now is 06:36.