CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > AVL FIRE

blended fuel in fire

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By MohammadMehdi

Reply
 
LinkBack Thread Tools Display Modes
Old   April 21, 2014, 09:09
Default blended fuel in fire
  #1
New Member
 
Join Date: Nov 2013
Posts: 11
Rep Power: 3
MohammadMehdi is on a distinguished road
I was wondering if someone could tell me how can i simulate spray for blended fuel? I can't understand what changes should i make in general transport model section for blended fuel?

P.S : i have no problem in simulating spray for gasoline but i don't know how simulate blended fuel.(gasoline+ethanol)

Thanks in advanced
MohammadMehdi is offline   Reply With Quote

Old   April 23, 2014, 09:35
Default hi
  #2
New Member
 
Join Date: Apr 2014
Posts: 9
Rep Power: 3
taoyikai is on a distinguished road
In the spray module, the number of fluids can be set.
With in your circumstance, it should be two, and the type below should be set as the two fuel that you have mentioned
taoyikai is offline   Reply With Quote

Old   April 24, 2014, 04:23
Default
  #3
New Member
 
Join Date: Nov 2013
Posts: 11
Rep Power: 3
MohammadMehdi is on a distinguished road
Thanks for your reply


I had done the same thing that you told me. but the calculation does not start (after i run the case a message is appeared your calculation is finished)
I don't have this problem when i run a case with pure ethanol or pure gasoline. So i believe i should change something else too. I would be grateful if you can tell me should i change something else or only changes in property section is enough?
MohammadMehdi is offline   Reply With Quote

Old   April 25, 2014, 11:18
Default
  #4
New Member
 
Join Date: Nov 2013
Posts: 11
Rep Power: 3
MohammadMehdi is on a distinguished road
I have solved my problem. Since some other people may face this problem in some time I am writing the answer:

in a multi-component fuel the evaporation model in submodel section should be changed to multi-component model.
shahrbanoo likes this.
MohammadMehdi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
avl fire dual fuel (methane+diesel) combustion simulation khatamnejad AVL FIRE 10 August 1, 2015 15:27
simulate fuel cell with fire shahrbanoo AVL FIRE 1 September 1, 2013 21:25
Simulation of syngas-diesel dual fuel combustion with AVL FIRE bahaaddein AVL FIRE 1 January 28, 2013 07:19
Inflow condition for the liquid fuel pool fire Jianping Zhang Main CFD Forum 0 May 1, 2003 07:24


All times are GMT -4. The time now is 19:55.