CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Crack error in STAR-CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 11, 2008, 00:15
Default Crack error in STAR-CD
  #1
Sachin
Guest
 
Posts: n/a
I am creating a sphere in STAR-CD. I get crack erroe which means unconnected regions . CAn anyone tell me how to remove it

Sachin
  Reply With Quote

Old   April 16, 2008, 16:37
Default Re: Crack error in STAR-CD
  #2
reza
Guest
 
Posts: n/a
this might help:

put your geometry in CSET. If you are sure that your crack geometry on a certain Cell type then do this (XXX represent Cell type number)

CSET NEWS TYPE XXX

(otherwise just do CSET ALL)

then klick Tool-->Check tool

check the aspect ratio and put any number less than 1 and Do NOT put the failed Cells in CSET. This will give you the number of the smallest cell lenght...e.g. 0.5 mm

then do

VSET NEWS CSET

open the Vertex tool and do a vertex merge with tolerance value less than 0.5 (e.g 0.49). so you are sure that none of your smallest cells will also be merge. Be sure that you merge the cells that are only in VSET. (Otherwise ALL if you are sure)

this you should be able to get rid of any crack.

cheers, Reza

  Reply With Quote

Old   April 16, 2008, 18:57
Default Re: Crack error in STAR-CD
  #3
Sachin
Guest
 
Posts: n/a
Hi Reza,

Thank you for sharing this. I will try this.

Sameer
  Reply With Quote

Old   April 17, 2008, 01:13
Default connetivity error in STAR-CD
  #4
Sachin
Guest
 
Posts: n/a
I have the connectivity error for the same. It shows two different group of cells. Group 1 and Group 2 and I can not couple them as they are not master and salve cell faces. Can you please focus on that.

Thanks .

Sachin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crack problems Sara CD-adapco 3 August 6, 2008 12:18
found crack in prostar but no crack in CCM+ ?? Ingear CD-adapco 4 October 23, 2006 09:37
crack in sector mesh escapist CD-adapco 2 May 19, 2005 07:25
How to crack this problem Lee CD-adapco 2 September 12, 2003 10:40
Crack problems again Carlos Saraiva CD-adapco 2 January 31, 2003 05:12


All times are GMT -4. The time now is 10:45.