CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

gturbo

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 5, 2005, 09:59
Default gturbo
  #1
cfdxxx
Guest
 
Posts: n/a
I am trying and trying to construct with gturbo a so-called turbovolume but I receive anytime the following error message

"ERROR: ACIS error 69026 : inconsistent face-body relationships. A valid flow volume could not be constructed..."

Being my gemetry an automotive compressor highly skewed could be the error due to the fact that I am using only three blade section (@hub, @middle and @shroud)?

A infinite thanks to any person who will try to help me. In need also tips for understand why and where the procedure fails.

Filippo

  Reply With Quote

Old   April 7, 2005, 11:29
Default Re: gturbo
  #2
Dragos
Guest
 
Posts: n/a
I had once a similar problem. I tried to construct a sector of a three blade wind turbine. Because of the geometry, when it tried to construct the sector, the two periodic faces intersected during the building process and gave the same error as in your case. My solution was to increase a litle bit the hub diameter. Another solution would also be to decrease the shroud diameter. In any way it has nothing to do with how many intermediate sections of the blade you have.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gambit and gturbo pitu FLUENT 6 January 9, 2012 04:26
use of Gturbo to make turbine blade usman FLUENT 0 December 31, 2007 06:47
need urget help gturbo! maseay FLUENT 0 August 17, 2007 03:27


All times are GMT -4. The time now is 07:19.