Spain, April 26, 2017
The Fifth Symposium on OpenFOAM® in Wind Energy (SOWE 2017)
is hosted by the Department of Wind Energy at CENER
(National Renewable Energy Centre of Spain). As in the
previous editions, the symposium offers a space to share the
latest developments based on OpenFOAM® for Wind Energy
applications. The symposium brings together experts,
beginners, developers and final end users to discuss the
research results and techniques to solve the new demands of
the Wind Energy sector.
Description:
Customize this page
Change layout
The Fifth Symposium on OpenFOAM in Wind Energy (SOWE 2017)
Conference description:
The Fifth Symposium on OpenFOAM® in Wind Energy (SOWE 2017)
is hosted by the Department of Wind Energy at CENER
(National Renewable Energy Centre of Spain). As in the
previous editions, the symposium offers a space to share the
latest developments based on OpenFOAM® for Wind Energy
applications. The symposium brings together experts,
beginners, developers and final end users to discuss the
research results and techniques to solve the new demands of
the Wind Energy sector.
The First Edition of SOWE was hosted by ForWind and
Fraunhofer IWES in Oldenburg (Germany).
The Second Edition of SOWE was hosted by NREL and RASEI in
Boulder (Colorado, USA).
The Third Edition of SOWE was hosted by Politecnico di
Milano in Milan (Italy).
The Fourth Edition of SOWE was hosted by Delft University of
Technology (The Netherlands).
Date and venue:
The conference will be at 26, 27, 28 April 2017 at the
ADItech Headquarters.
Address: C/ Tajonar, 20 – 31006 Pamplona (Navarra) – Spain.
See location here.
Topics:
The symposium will cover a wide spread of topics linked to
the wind energy research area. Most relevant topics are
reported below and the presentations will be arranged
according to the described arguments. The proposed topics
are not limiting, since they are not intended to limit the
participation to the discussion on other wind energy
applications in OpenFOAM®.
Atmospheric flows (including flow over complex terrains
and sea)
HAWT & VAWT wind turbine aerodynamics and wakes
Vertical Axis Wind turbines
Small scale and urban wind energy applications
Site assessment and wind plant aerodynamics
Offshore wind aerodynamics and hydrodynamics
Other (including meshing, algorithms, post-processing,
parallel performance, etc.)
Call for abstracts:
Abstract deadline: 1 March 2017 (late submissions could
still be considered, email abstracts to sowe2017@cener.com)
Abstract selection notification: 8 March 2017
Paper deadline: 21 April 2017
Contact:
For any inquiry or request contact us by email:
sowe2017@cener.com
___________________________________________________________________________________________
Disclaimer: This offering is not approved or endorsed by
OpenCFD Limited, the producer of the OpenFOAM software and
owner of the OPENFOAM® and OpenCFD® trademarks. OPENFOAM is
a registered trademark of OpenCFD Limited. OpenCFD Limited
is a wholly owned subsidiary of ESI Group.