OpenFOAM Verification & Validation

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 1 of 4 1 2 3 > Last »

Threads in Forum : OpenFOAM Verification & Validation

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		Sticky: Purpose of this forum gschaider	May 14, 2019 00:49 by kerim	6	5,882
		Rising Bubble Test Case Using interFoam: Unrealistic Results?! ( 1 2) farazarbabi	April 14, 2021 08:08 by B_R_Khan	20	5,566
		NACA0012 validation with OF v4 and OF v2006 Ivangzp	April 13, 2021 15:40 by HPE	6	446
		Can icoFoam capture von Karman vortices at Laminar Re numbers? B_R_Khan	March 18, 2021 06:38 by B_R_Khan	0	143
		Flat plate (H-type) transition using Dynamic Smagorinsky Model backscatter	March 4, 2021 01:03 by backscatter	0	190
		steadyState - Euler - different endresults PSander	January 30, 2021 05:18 by PSander	0	226
		Validatation NACA 0012 OFv2006 lack of precision Ivangzp	January 11, 2021 02:22 by mzzmrt	3	339
		Docker naca0012 validation Ivangzp	January 2, 2021 19:22 by Ivangzp	3	235
		Running irregular wave by olaflow Lewis Liang	January 1, 2021 05:14 by Wakatsuki	6	768
		Mesh Motion is not consistent ( 1 2) pruthvi1991	December 11, 2020 07:53 by guptaram	22	5,011
		NACA 0012 Verification isaac1326	October 15, 2020 17:56 by klausb	2	1,087
		Conflicting Lift and Drag coefficient values in OpenFoam Akin-iii	October 15, 2020 17:46 by klausb	1	403
		I am trying to validate pimpleFOAM solver for laminar planarPoisuille case sabiru	October 5, 2020 04:35 by Yann	1	280
		Tutorial for airfoil analysis and validation md_s3d	October 5, 2020 04:22 by Yann	1	226
		The results of the viv numerical simulation do not match the results of the paper zxh666hahah	September 5, 2020 01:28 by zxh666hahah	0	305
		NASA Turbulence Modeling Resource alexeym	August 12, 2020 16:46 by dweaver123	4	3,164
		OpenFOAM V&V experts needed for multiple industries thunde47	August 4, 2020 13:20 by thunde47	2	443
		CLSVOF - for capillary rise kuria	July 30, 2020 03:56 by kuria	2	1,088
		Strange pressure drop behavior mm66	July 24, 2020 14:38 by mm66	6	325
		chtMultiRegionFoam transient case issue Rustralia	July 20, 2020 03:49 by Tobi	2	372
		oscillating 2D drop mesh convergence joshmccraney	July 11, 2020 05:25 by magnushaese	1	480
		Prediction of outdoor temperature with OpenFOAM bdgmm	July 6, 2020 02:10 by bdgmm	2	331
		Validation of buoyantBoussinesqPimpleFoam solver rajibroy	July 1, 2020 03:58 by Santiago	1	419
		Rotating flow in circular tank with interFoam RicardoLB	June 16, 2020 05:02 by RicardoLB	4	586
		pitzDaily validation laurentD	June 2, 2020 04:11 by laurentD	3	2,942
		Post-stall behaviour of airfoils using different turbulence models ColourAshRed	May 28, 2020 09:48 by mzzmrt	3	522
		how to know when mesh is sufficiently refined? joshmccraney	May 14, 2020 02:14 by HPE	5	579
		Verification of melting and solidification three phase model kuechenrole	May 10, 2020 11:47 by anu4anusai	4	2,675
		Overtopping Discharge ihFoam rawdraw	April 27, 2020 15:20 by rawdraw	0	378
		SimpleFoam: velocity profile does not match analytical solution Abhinav_Nagarajan	April 7, 2020 00:58 by Abhinav_Nagarajan	0	439
		Simulations of droplet size distributions, liquid-liquid stirred tanks by OpenFOAM sharonyue	February 9, 2020 06:27 by Andrea1984	3	1,569
		Wigley Hull Experimental Data ( 1 2) openfoam_user	November 24, 2019 01:51 by Waliur Rahman	21	9,272
		Unphysical Rise of Water-surface near tail-gate pratik_chakraborty	November 18, 2019 14:12 by Santiago	3	672
		Validation of LES models ( 1 2) Bernhard	November 18, 2019 14:05 by Santiago	29	19,486
		Thermosingle layer RegionModel Zhiheng Wang	November 16, 2019 05:35 by atulkjoy	5	1,874
		Validating Brownian motion in OpenFOAM raptorishungry	October 22, 2019 13:28 by xuegy	7	1,472
		Is there any test case to test turbulence modelling for two phase flow? kk415	October 11, 2019 04:34 by kk415	2	664
		interFoam - validation for bubble/droplet flows in microfluidics ( 1 2 3) duongquaphim	October 3, 2019 02:33 by UKARUN	48	12,970
		porousSimpleFoam, slow convergence? JoaoDMiranda	September 24, 2019 06:53 by wouterremmerie	1	542
		Wrong mass flux for solid into fluid domain in icoFsiElasticNonLinUlSolidFoam solver EmadTandis	September 23, 2019 10:43 by HPE	1	509
		Pressure drop error of laminar pipe flow with simpleFoam xiaolong	September 22, 2019 05:07 by HPE	4	681

Read this first: How to ask a question on the forums

Page 1 of 4 1 2 3 > Last »

Display Options

Showing threads 1 to 40 of 144

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules