-
Fluid-driven Soft Robots
Workshop, Grand Hotel Palazzo, Livorno, Italy, April 24, 2018
Scalability and new domains of application of novel fluidic
compliant actuators
-
Shallow Flows - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-genesius-Rode, Belgium, May 7, 2018
The purpose of this Lecture Series is to offer an overview
of various aspects of shallow flows: fundamental as well as
applied aspects, and numerical modelling as well as
laboratory studies and field observations.
-
OpenFOAM Foundation course
Course, ESI GmbH, Siemensstrae 12, Neu-Isenburg, Germany, May 14, 2018
This course introduces the open source CFD toolbox, OpenFOAM. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so is
useful to both new users and existing users wishing to broaden their basic
knowledge of OpenFOAM.
-
Virtual OpenFOAM Foundation course
Online Event, May 14, 2018
This course introduces the open source CFD toolbox,
OpenFOAM. Online training
via internet. It provides a
foundation for all aspects of OpenFOAM, from running cases
to programming, so is
useful to both new users and existing users wishing to
broaden their basic
knowledge of OpenFOAM.
-
Large Eddy Simulation - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-genesius-Rode, Belgium, May 14, 2018
The purpose of this Lecture Series is to offer a full
overview of the present development and the potential of
the Large Eddy Simulation (LES) of turbulent flows. Its
content is addressed both to researchers interested in the
fundamental simulation of turbulence and engineers wanting
to apply the LES technique or LES solvers to the accurate
simulations of turbulent flows.
-
OpenFOAM Advanced course
Course, Neu Isenburg, Germany, May 16, 2018
This course covers advanced topics on the open source CFD toolbox, OpenFOAM.
It is designed to enable the participants to use OpenFOAM effectively on real
engineering problems and develop the toolbox to suit their needs. It covers general
use and programming of OpenFOAM, building on topics presented earlier in the
Foundation Course.
-
ERCOFTAC - Computational Aeroacoustics, III 4-5 June 2018 2018 ONERA, Paris, France
Course, ONERA, PARIS, France, June 4, 2018
Designed for researchers in industry and academia.
Aim:
1) full overview of aeroacoustics theories,2) discuss the
practical coupling between CFD’s results and CA , 3) review
applications in engineering 4) Present advanced CA methods,
5) review the direct computation of aerodynamic noise, and
6) specific topics reflecting participant interests
discussed in a round table session.
-
OpenFOAM Aeroacoustics course
Online Event, June 12, 2018
This course covers Theoretical and Applied concepts in Aeroacoustics (CAA) using
OpenFOAM, touching on progressive Multiphysics design challenges, e.g. Aero-
Vibro-acoustics (AVA).The training provides examples of process and best
practice.
-
AEROVEHICLES3
Conference, Milano, Italy, June 13, 2018
Third International Conference in numerical and experimental
aerodynamics
of road vehicles and trains
This conference is meant as a place where engineers and
researchers can
exchange their ideas in ground vehicle aerodynamics. It is
meant as a
forum for engineers and scientists from industry
(manufacturers and
operators of road vehicles and trains) and universities for
presentations
and discussions of the relevant advances in vehicle
aerodynamics
techniques.
-
6th Symposium on OpenFOAM in Wind Energy (SOWE)
Conference, Gotland, Sweden, June 13, 2018
The use of OpenFOAM in the wind energy community has been
spreading. The conference is to discuss all aspects of the
development and use of CFD methods in wind energy with
OpenFOAM. This includes, but is not limited to wind field
simulateions, site assessments, aerodynamics or wind water
interactions.
-
OpenFOAM Overset course
Online Event, June 13, 2018
This course covers Theoretical and Applied concepts using overset (chimera)
meshing in OpenFOAM.The training provides examples of process and best
practice, which are useful to existing OpenFOAM users wishing to broaden their
application knowledge of OpenFOAM towards using overset meshing as an
alternative to mesh morphing or sliding interfaces.
-
OpenFOAM Foundation course
Course, Paris, France, June 18, 2018
This course introduces the open source CFD toolbox, OpenFOAM. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so is
useful to both new users and existing users wishing to broaden their basic
knowledge of OpenFOAM.
-
Virtual OpenFOAM Foundation course
Online Event, June 18, 2018
This course introduces the open source CFD toolbox,
OpenFOAM. Online training
via internet. It provides a
foundation for all aspects of OpenFOAM, from running cases
to programming, so is
useful to both new users and existing users wishing to
broaden their basic
knowledge of OpenFOAM.
-
A three-day course on ``Large-Eddy Simulation and Detached-Eddy Simulations: How to use an in-House Fortran source code''
Course, Waterfront Hotel, Gothenburg, Sweden, June 18, 2018
During the course, the participants will learn and work with
an in-house LES/DES code called CALC-LES, written by the
lecturer. It is a finite volume code written in Fortran 77.
-
OpenFOAM Advanced course
Course, Paris, France, June 20, 2018
This course covers advanced topics on the open source CFD toolbox, OpenFOAM.
It is designed to enable the participants to use OpenFOAM effectively on real
engineering problems and develop the toolbox to suit their needs. It covers general
use and programming of OpenFOAM, building on topics presented earlier in the
Foundation Course.
-
5th International conference on Turbulence and Interaction
Conference, Les trois Ilets, France, June 25, 2018
The TI2018 Conference participates to the same philosophy as
previous ones, with emphasis in providing strong evidence
that the triptych of science, namely theory, experiments and
computing, through their interplay come to achieving
progress in understanding and predicting the physics of
complex flows and engineering problems.
-
13th SPHERIC International Workshop
Workshop, National University of Ireland Galway, Galway, Ireland, June 26, 2018
The SPHERIC International Workshop is the annual global
forum for development and applications of Smoothed Particle
Hydrodynamics (SPH) and related meshless particle methods.
Join us on Ireland's Atlantic Coast to share the latest
advances in SPH. In addition, the optional training day on
25 June offers an intensive introduction to the theory and
application of SPH.
-
ICCFD10 - Barcelona - July 9-13, 2018
Conference, Palau Macaya, Barcelona, Spain, July 9, 2018
ICCFD is a leading international conference devoted to all
innovative aspects of
CFD, fundamental and applied. This year's conference is
hosted in the beautiful
city of Barcelona and will include a combination of five
inspiring plenary talks from
world leading experts and three parallel sessions of the
latest fundamental and
applied CFD research.
-
2nd Summer School on Complex Fluid-Flows in Microfluidics
Course, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal, July 9, 2018
This course intends to provide cutting-edge knowledge on
complex
fluid-flow at microscale, from experimental and numerical
perspectives.
-
12th International Conference on Advances in Fluid Mechanics
Conference, Hotel Slon, Ljubljana, Slovenia, July 10, 2018
The object of the meeting is to provide a forum
for discussing new work in fluid mechanics and,
in particular, for promoting the interchange of
new ideas and the presentation on the latest
applications in the field.
-
12th International Conference on Advances in Fluid Mechanics
Conference, Hotel Slon, Ljubljana, Slovenia, July 10, 2018
The object of the meeting is to provide a forum
for discussing new work in fluid mechanics and,
in particular, for promoting the interchange of
new ideas and the presentation on the latest
applications in the field.
-
OpenFOAM Foundation course
Course, London, United Kingdom, July 16, 2018
This course introduces the open source CFD toolbox, OpenFOAM. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so is
useful to both new users and existing users wishing to broaden their basic
knowledge of OpenFOAM.
-
Virtual OpenFOAM Foundation course
Online Event, July 16, 2018
This course introduces the open source CFD toolbox, OpenFOAM. Online training
via internet. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so is
useful to both new users and existing users wishing to broaden their basic
knowledge of OpenFOAM.
-
Physics Conferences | International Physics Conferences | Optics and Lasers Conferences
Conference, Best Hotel in Prague, Prague, Czech Republic, July 17, 2018
EURO PHYSICS 2018 cordially invites participants from all
over the world to attend 5th World Congress on Physics,
scheduled during July 17-18, 2018 at Prague, Czech
Republic mainly focused on the theme “Exploring ideas in
recent trends, Advancements and Innovations in Physics
and allied concepts”.
-
Physics Conferences | International Physics Conferences | Optics and Lasers Conferences
Conference, Best Hotel in Prague, Prague, Czech Republic, July 17, 2018
EUROPHYSICS 2018 cordially invites participants from all
over the world to attend 5th World Congress on Physics,
scheduled during July 17-18,2018 at Prague,Czech
Republic mainly focused on theme “Exploring ideas in
recent trends, Advancements and Innovations in Physics
and allied concepts”.
To know more: https://physics.physicsmeeting.com
Abstract Submission:
https://physics.physicsmeeting.com/abstract-
submission.php
Registration:
https://physics.physicsmeeting.com/registration.php
-
OpenFOAM Advanced course
Course, London, United Kingdom, July 18, 2018
This course covers advanced topics on the open source CFD toolbox, OpenFOAM.
It is designed to enable the participants to use OpenFOAM effectively on real
engineering problems and develop the toolbox to suit their needs. It covers general
use and programming of OpenFOAM, building on topics presented earlier in the
Foundation Course.
-
32nd Symposium on Naval Hydrodynamics
Conference, HafenCity University, Überseeallee 16, 20457 Hamburg , Germany, August 5, 2018
This biennial, international symposium focuses on research
and development in naval hydrodynamics.
The Symposium Proceedings have traditionally provided
archival documentation of state-of-the-art research and
development in naval hydrodynamics.
The Symposium is co-sponsored by the U.S. Office of Naval
Research (ONR) and the Institute for Fluid Dynamics and Ship
Theory of the Hamburg University of Technology (TUHH).
-
NUMAP FOAM 2018
Workshop, University of Zagreb, Zagreb, Croatia, August 20, 2018
OpenFOAM Summer School at Uni Zagreg
-
16th ERCOFTAC Osborne Reynolds Day Manchester University Monday September 3, 2018
Conference, School of MACE, The University of Manchester, UK, Sackville Str, Manchester, United Kingdom, September 3, 2018
<p> The University of Manchester will once again be playing
host to the prestigious ERCOFTAC Osborne Reynolds Day in
2018. This one day event will take place in the School of
MACE, a successor of the
department in which Osborne Reynolds, established himself as
the nation’s leading engineering fluid mechanicist. The
Osborne Reynolds Day programme will feature presentations by
some of the brightest
of the UK’s newly-graduated and soon-to-graduate PhDs in
fluid mechanics. </p>
-
12th European Fluid Mechanics Conference
Conference, TU Wien, Vienna, Austria, September 9, 2018
The next European Fluid Mechanics Conference EFMC12 will
take place in Vienna at TU Wien from September 9 to
September 13, 2018.
-
Hochschulkurs zur Berechnung turbulenter Strömungen
Course, Dresden, Germany, September 12, 2018
Der Kurs behandelt die Modellierung und
Simulation turbulenter Strömungen. Das Thema wird in 16
sorgfältig abgestimmten Vorlesungen umfassend
behandelt - von den methodische Grundlagen bis hin zu
neueste Modellierungen und Anwendungen.
Es handelt sich um einen der ältesten und renommiertesten
Kurse im Ingenieurbereich. Er wurde vor exakt 40 Jahren von
Prof. Dr. Wolfgang Rodi initiiert und seitdem von führenden
Vertretern es Themas ständig verändert, angepasst und
aktualisiert.
-
The 13th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer - Numerical Fluids 2018
Conference, Sheraton Hotel, Rhodes, Greece, September 13, 2018
This symposium covers various subjects: from new numerical
methods and fundamental research until engineering
applications. This annual meeting is a part of the
International Conference of Numerical Analysis and Applied
Mathematics (ICNAAM) and thus it is organized together with
many other symposia on numerical analysis: this also offers
a wider audience since ICNAAM is perhaps one of the biggest
events in the field of the numerical analysis involving
hundreds of scientist from the whole world.
-
CFDEM®training
Course, Industriezeile 35, Linz, Austria, September 17, 2018
If you want to learn how to fully harness the power of open
source DEM and CFD-DEM simulations, visit our short courses
and get crucial knowledge directly from our developers.
LIGGGHTS® DEM Engine / CFDEM®couplingCFD-DEM Engine /
CFDEM®Workbench for LIGGGHTS®
-
6th ESI OpenFOAM User Conference 2018
Conference, Radisson Blu Airport Hotel, Hamburg, Germany, October 23, 2018
This event, organized by ESI OpenCFD, offers a unique
opportunity to learn about the latest developments and
interact with users and developers
across the OpenFOAM community.
This is the OpenFOAM primary event in all areas of CFD
applications and Process integration; useful for CFD
engineers, Managers, IT specialists, Developers,
Consultants, Researchers, Students,those seeking Continuing
Professional Development hour-creditation.
-
Gothenburg Region OpenFOAM User Group Meeting
User Conference, Teknikparkens konferenscenter, Sven Hultins gata 9, Gothenburg, Sweden, November 21, 2018
The purpose is to bring together people working with
OpenFOAM to get to know each other and share experiences.
It is in particular a good occasion for OpenFOAM users at
the SNIC resources (from all of Sweden) to meet and learn
from each other, but it is open to anyone (in the world).
-
OpenSource CFD for industry – high-level development: Implementations with the OpenFOAM(R) technology and C++
Course, Teknikparkens konferenscenter, Sven Hultins gata 9, Gothenburg, Sweden, November 22, 2018
Course teaching high-level development in OpenFOAM.
-
LES4ICE'18
Conference, 1 avenue de Bois-Preau, Rueil-Malmaison, France, December 11, 2018
Since its 1st edition in 2008, LES4ICE aims at providing a
forum of international exchanges concerning recent advances
in Large-Eddy Simulation research applied to Internal
Combustion Engine Flows and related experimental
techniques. It brings together engine designers and
research scientists working in the field of ICE to debate
the state of the art in LES applied to ICEs and examine
advanced experimental techniques capable of supporting and
validating its development.
|
