Best Practice for Eng CFD 22-23 October 2015 GE, Munich, Germany

================================================

To Register: Dr. Richard E Seoud Course Coordinator: Prof. Charles Hirsch, Em. Vrije Universiteit Brussel, Pres. Numeca Int'l, Belgium

============================================================ Rationale ===========

This course is targeted at relatively new and improving CFD analysts in engineering industries and consultancies.

It provides the knowledge to effect a step-change in the accuracy and reliability of CFD practices across a range of engineering applications relevant to the power generation, aerospace, automotive, built environment and turbomachinery sectors – amongst others.

======= Scope =======

This course is directly relevant to engineering applications of CFD for single-phase, compressible and incompressible, steady and unsteady, turbulent flows, with and without heat transfer. Much of the content will also be relevant to even more complex engineering applications.

The main focus will be on RANS applications, but an introduction to the special considerations required by LES and hybrid methods is also given.

The course provides the means for CFD analysts to significantly enhance their use of commercial and open-source CFD software for engineering applications. In particular, it provides guidance on best practices and highlights common pitfalls to be avoided.

========== Lecturers ==========

Prof. Charles Hirsch Em. Vrije Universiteit Brussel President, Numeca Int., Belgium

== Prof. Kemo Hanjalic TU Delft, The Netherlands

== Prof. Dominique Laurence UMIST, Manchester, UK EDF, Chatou, France

== Prof. Michael Leschziner Imperial College, London, UK

== Prof. Wolfgang Rodi Karlsruhe Institute of Technology, Germany

========== Programme ==========

Thursday 22 October 2015 9:00 Registration and coffee 9:30: Prof. C. Hirsch: Quantification and Control of Numerical Errors and uncertainties 10:30: Prof. C. Hirsch: introduction to Verification and Validation 11:30: Refreshments 12:00 Prof. W. Rodi: The ERCOFTAC Knowledge Base 13:00: Lunch 14:30 Prof. M. Leschziner: RANS-based Turbulence Modelling I 15:30: Prof. M. Leschziner: RANS-based Turbulence Modelling II 16:30: Question and Answer Session Friday 23 October 2015 9:00: Prof. D. Laurence; LES and LES based Methods 10:00: Prof. D. Laurence: LES, Suitable Discretization Methods 11:00: Refreshments 11:30: Prof. K. Hanjalic: RANS and LES of Heat Transfer I 12:30: Lunch 14:00: Prof. K. Hanjalic: RANS and LES of Heat Transfer II 15:00: Prof. Ch. Hirsch: BPG for Industrial CFD Applications 16:00: Question and Answer Session 16:30: End of Course

=========================================== http://www.ercoftac.org/events/best_practice_for_eng_cfd/ ==========================================

REGISTRATION richard.seoud-ieo@ercoftac.org