|
[Sponsors] |
![]() |
![]() |
#1 |
Senior Member
tmeysam92
Join Date: Jun 2011
Posts: 135
Rep Power: 15 ![]() |
Hello all,
I meshed the geometry(FIG.1) in ICEM CFD. but the mesh is not good(FIG.2). How can I solve the problem. thanks in advance. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
tmeysam92
Join Date: Jun 2011
Posts: 135
Rep Power: 15 ![]() |
the tin and prj files are here.
Last edited by tmeysam92; January 18, 2013 at 05:44. |
|
![]() |
![]() |
![]() |
![]() |
#3 |
Member
Alexander
Join Date: Nov 2009
Location: Blansko, Czech Republic
Posts: 30
Rep Power: 16 ![]() |
I've got only ANSYS 13. So can you export geimetry to IGES or STEP.
![]() I've got some time and can help you. |
|
![]() |
![]() |
![]() |
![]() |
#4 |
Member
Alexander
Join Date: Nov 2009
Location: Blansko, Czech Republic
Posts: 30
Rep Power: 16 ![]() |
In attach file. You can find the solution of your problem.
Pospelov Alexander. ![]() |
|
![]() |
![]() |
![]() |
![]() |
#5 |
Senior Member
tmeysam92
Join Date: Jun 2011
Posts: 135
Rep Power: 15 ![]() |
||
![]() |
![]() |
![]() |
![]() |
#6 |
Member
Alexander
Join Date: Nov 2009
Location: Blansko, Czech Republic
Posts: 30
Rep Power: 16 ![]() |
So. In my file you can fine enother topology for your part. Look at it more carefully and you will see the defferece.
![]() |
|
![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
AB
Join Date: Sep 2009
Location: France
Posts: 323
Rep Power: 21 ![]() |
tmeysam92, you didn't add your .blk file in the archive. If you don't want to, you could post a picture of your blocking.
But it looks like either you didn't associate an edge, either you forgot to add a split .. not very easy to say without .blk file or picture of your blocking. |
|
![]() |
![]() |
![]() |
![]() |
#8 | |
Senior Member
tmeysam92
Join Date: Jun 2011
Posts: 135
Rep Power: 15 ![]() |
Quote:
i attached tin,prj and blk files. |
||
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with querying the meshing database in CFX-Pre | ashtonJ | CFX | 18 | April 18, 2023 23:49 |
[Other] Hex meshing problem DM12 | patrick | ANSYS Meshing & Geometry | 7 | January 9, 2015 07:21 |
Strange ANSYS Meshing 13.0 Problem | brunob | ANSYS Meshing & Geometry | 3 | June 21, 2011 20:03 |
Meshing problem in GAMBIT | Vidya Raja | FLUENT | 0 | May 20, 2006 23:31 |
GAMBIT meshing problem | Gauthier Lambert | Main CFD Forum | 1 | August 3, 2000 09:22 |