|
[Sponsors] |
February 9, 2015, 16:21 |
ICEM 2D Mesh to Fluent 14.5
|
#1 |
New Member
Wilson
Join Date: Feb 2015
Posts: 2
Rep Power: 0 |
Hello guys,
I'm struggling with ICEM, this is driving me crazy. I'm building a 2D mesh of a turbine blade with periodic boundary conditions at the bottom/top. I have defined a 1st mesh working but it was too poor (Quality Under 0,2) and my case wasn't convergent so I improve my mesh quality (above 0,65). However, I got the following issue while importing my mesh in Fluent 14.5 WARNING: Cell 9756 of thread 11 is missing face 3. Cell Centroid is (-17.889458, 28.263738). Clearing partially read grid. Error: Build Grid: Aborted due to critical error. Error Object: #f I have found some tips in the forum but no one work. Do you have any idea to fix that ? A picture : I enclosed the working-old-mesh and the not-working-improved-mesh : https://www.dropbox.com/sh/nb5saw81n...z69PGPAua?dl=0 Moreover, if you have some idea sto improve my mesh quality at the trailing edge, it will help me a lot. For the background, this CFD model will be compared to experimental data. It is a supersonic turbine blade at high incidence angle. Thank you, Kind Regards, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] icem fluent mesh with cyclic boundary condition | jiejie | OpenFOAM Meshing & Mesh Conversion | 2 | February 24, 2020 03:34 |
[ICEM] ICEM mesh to FLUENT, body not present in FLUENT | Thibalt | ANSYS Meshing & Geometry | 5 | June 11, 2014 12:45 |
Remeshing in Fluent 14.5 .. for an hexa mesh genrated from an Ogrid | Abhya | FLUENT | 0 | September 9, 2013 03:40 |
Inner geometry gets lost exporting mesh from ICEM CFD to CFX-Pre | powpow | CFX | 3 | December 20, 2012 09:14 |
prob while exporting icem cfd hexa mesh to fluent | mani | CFX | 4 | March 7, 2007 03:41 |