February 26, 2018, 06:25
|
Multiple cell zone creation problem in ICEM
|
#1
|
Member
ishan
Join Date: Oct 2017
Posts: 77
Rep Power: 8
|
Hello,
I am trying to simulate aeroacoustics of a blade using the Fwocs-Williams Hawkings model with a “permeable surface” in Fluent. I have made a 2D mesh in ICEM but I am having troubles with defining an additional second cell zone apart from the usual solid or fluid. The zone needs to be such that it covers the regions around the blade and its wake. That said, the zone needs to be of the the same fluid which would be in the entire domain. The numerical domain is rectangular in shape, has pressure-inlet, pressure-outlet, translational periodicity on top and bottom and no-slip walls on the balde. I have tried making a body in ICEM by adding the blocks(using "add to part") around the blade and it’s wake to the created body. Following the usual procedure, I convert it to unstructured mesh and then check for errors. At the interface between the created body and the rest of the mesh, it indicates “missing internal faces” error. It auto-fixes something but I don’t know how and what. I have checked the ICEM guide and this error is legitimate.Even after this error is fixed there are problems while importing the mesh to Fluent. No wonder, on importing the mesh to Fluent it displays the same error and aborts due to critical error. Before this, I have tried to import it without making any bodies and it imported properly. Is there anyway, I can fix this problem manually? I am pretty sure I am missing a step here. I have referred to a number of threads here but they only say create the bodies and that’s it.
|
|
|