|
[Sponsors] |
[ICEM] Improve hexa mesh quality and determinant |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 29, 2019, 13:47 |
Improve hexa mesh quality and determinant
|
#1 |
New Member
José Ramón Quiñonez Arce
Join Date: Oct 2017
Location: Leeds, UK
Posts: 17
Rep Power: 8 |
Hello,
I am currently working with the mesh of a flame stabiliser in a quarter of a combustion chamber. I am considering only hexahedral elements, and a annular feed at the outlet face of the contraction. I have been working with this geometry in the past producing sensible meshes, but this one has a simulated weld at the inlet of the contraction, so i just added more ogrids to the mesh, and the quality is very bad, and also the determinant. Could you please help me with some tips on how to improve my mesh? I attach some photos, they show my current geometry and mesh, as you can see I have created some ogrids for the annular feed and the simulated welding. 1.jpg 2.jpg 6.jpg 7.jpg 9.jpg Many thanks! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
[snappyHexMesh] sHM layer process keeps getting killed | MBttR | OpenFOAM Meshing & Mesh Conversion | 4 | August 15, 2016 03:21 |
[ICEM] Heart modeling - ICEM Hexa Mesh quality improvement | heart_modeller | ANSYS Meshing & Geometry | 1 | April 8, 2016 08:16 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
snappyhexmesh remove blockmesh geometry | philipp1 | OpenFOAM Running, Solving & CFD | 2 | December 12, 2014 10:58 |