[ANSYS Meshing] The mesh file exporter failed during translation

gabies · August 8, 2020, 10:50

Hello,

I have a problem with meshing, but I suppose it's because of geometry and I don't know how to solve it.
I work on a simulation of the airflow over the wing. I prepared the element in Solidworks and moved it to Ansys. Then I created a surface body from it and added enclosure. Together I got 5 parts in simulation, so I supressed irrelevant bodies.
I moved to meshing and when I finished I got a message from the title: 'The mesh file exporter failed during translation'. Then I unsupressed other bodies, but then I got: 'The mesh file exporter could not resolve cyclic denpendencies in overlapping contact regions.Please try to Repair Overlapping Contact Regions.' I tried deleting contacts, hiding unwanted bodies, but it didn't work.
I guess the perfect solution would be "deleting" redundant geometry, however it's not possible from what I know.

Thank you in andvance for any help.

AtoHM · August 9, 2020, 04:21

Sounds like your geometry is not clean or what you want (already contains irrelevant bodies) and things go wrong from there. I have very limited experience with ANSYS Meshing, but I know Solidworks very well. Maybe you can show an image of your model including the model tree?

gabies · August 9, 2020, 11:33

Thank you AtoHM for your reply.

I solved my problem-I created surface body in SpaceClaim instead of DesignModeler and supressed connections.

August 8, 2020, 10:50	The mesh file exporter failed during translation	#1
gabies New Member Gabriela Join Date: Aug 2020 Posts: 4 Rep Power: 5	Hello, I have a problem with meshing, but I suppose it's because of geometry and I don't know how to solve it. I work on a simulation of the airflow over the wing. I prepared the element in Solidworks and moved it to Ansys. Then I created a surface body from it and added enclosure. Together I got 5 parts in simulation, so I supressed irrelevant bodies. I moved to meshing and when I finished I got a message from the title: 'The mesh file exporter failed during translation'. Then I unsupressed other bodies, but then I got: 'The mesh file exporter could not resolve cyclic denpendencies in overlapping contact regions.Please try to Repair Overlapping Contact Regions.' I tried deleting contacts, hiding unwanted bodies, but it didn't work. I guess the perfect solution would be "deleting" redundant geometry, however it's not possible from what I know. Thank you in andvance for any help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[foam-extend.org] problem when installing foam-extend-1.6	Thomas pan	OpenFOAM Installation	7	September 9, 2015 21:53
[Other] Adding solvers from DensityBasedTurbo to foam-extend 3.0	Seroga	OpenFOAM Community Contributions	9	June 12, 2015 17:18
SparceImage v1.7.x Issue on MAC OS X	rcarmi	OpenFOAM Installation	4	August 14, 2014 06:42
Problem compiling a custom Lagrangian library	brbbhatti	OpenFOAM Programming & Development	2	July 7, 2014 11:32
Trouble compiling utilities using source-built OpenFOAM	Artur	OpenFOAM Programming & Development	14	October 29, 2013 10:59

August 9, 2020, 04:21		#2
AtoHM Senior Member M Join Date: Dec 2017 Posts: 645 Rep Power: 12	Sounds like your geometry is not clean or what you want (already contains irrelevant bodies) and things go wrong from there. I have very limited experience with ANSYS Meshing, but I know Solidworks very well. Maybe you can show an image of your model including the model tree?

August 9, 2020, 11:33		#3
gabies New Member Gabriela Join Date: Aug 2020 Posts: 4 Rep Power: 5	Thank you AtoHM for your reply. I solved my problem-I created surface body in SpaceClaim instead of DesignModeler and supressed connections.