|
[Sponsors] |
February 15, 2021, 06:23 |
Choosing of axis
|
#1 |
New Member
Akash Datta
Join Date: Feb 2021
Posts: 1
Rep Power: 0 |
In Design Modeler while sketching a 3D rectangular channel can we assign the axis of the length, width and depth of the channel as per our convinience or do we have to assign it according to the normal sign convention that is length in x-direction, width in y-direction and depth in z-direction.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The CoP Does not exist: Validating Aerodynamic forces through a "line of action" | ds4719 | Main CFD Forum | 14 | February 18, 2022 18:05 |
[DesignModeler] axis display disparity of model and triad | ram881973 | ANSYS Meshing & Geometry | 14 | November 18, 2020 01:21 |
[blockMesh] Wierd behaviour of blockMesh creating axis in wedge | rcastilla | OpenFOAM Meshing & Mesh Conversion | 1 | December 4, 2018 06:24 |
[Other] dynamic Mesh with angular velocity not parallel to x axis | donQi | OpenFOAM Meshing & Mesh Conversion | 5 | October 2, 2014 23:19 |
Axis treatment in axisymmetrical problem | Jakob1 | OpenFOAM Pre-Processing | 2 | August 25, 2014 03:09 |