|
[Sponsors] |
[ICEM] How to mesh the external waterflow of a MCT blade |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 23, 2012, 02:32 |
How to mesh the external waterflow of a MCT blade
|
#1 |
New Member
Hongbin Chow
Join Date: Mar 2012
Posts: 3
Rep Power: 14 |
hello,everyone,I'm working on a marine current turbine (MCT) blade,it looks exactly like a wind turbine,except that it works underwater.
the blade got sections of NACA 634XX with really sharp trailing edge,and it is twisted. Now I want to mesh the fluid domain around the blade, a cylinder with a blade shaped hole. I failed meshing it in ANSYS mesh,so I think maybe ICEM CFD can do the job. how to split the block, or unstructured mesh? I am confused. someone help me? thanks a lot! |
|
March 23, 2012, 03:04 |
|
#2 |
Super Moderator
|
Your problem is similar to this one?
http://www.cfd-online.com/Forums/ans...mesh-wing.html |
|
March 23, 2012, 03:42 |
|
#3 | |
New Member
Hongbin Chow
Join Date: Mar 2012
Posts: 3
Rep Power: 14 |
Quote:
|
||
March 23, 2012, 03:47 |
|
#4 | |
Super Moderator
|
Quote:
|
||
March 23, 2012, 05:31 |
|
#5 |
New Member
Hongbin Chow
Join Date: Mar 2012
Posts: 3
Rep Power: 14 |
||
March 23, 2012, 05:34 |
|
#6 | |
Super Moderator
|
Quote:
|
||
March 28, 2012, 02:18 |
|
#7 |
Member
jeevan kumar
Join Date: Mar 2009
Posts: 88
Rep Power: 17 |
If you can upload your tin and blk file then it would be easy to give some suggestions on your mesh.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Problem making structured mesh on a surface | froztbear | ANSYS Meshing & Geometry | 4 | November 10, 2011 08:52 |
[ICEM] Problem making structural mesh on a surface | froztbear | ANSYS Meshing & Geometry | 1 | November 10, 2011 08:52 |
Moving Mesh Velocity Issue: Mesh velocity does not equal displacement | Doginal | CFX | 2 | September 8, 2011 12:02 |
engrid -> save as .stl with boundarie codes | Zymon | enGrid | 31 | August 29, 2011 13:40 |
How to control Minximum mesh space? | hung | FLUENT | 7 | April 18, 2005 09:38 |