|
[Sponsors] |
March 28, 2015, 16:54 |
Stent Modeling on ANSYS
|
#1 |
New Member
Join Date: Mar 2015
Posts: 1
Rep Power: 0 |
Hi,
I am trying to model a coronary artery stent on ANSYS, but have been having some errors that I don't know how to fix. I'm placing the stent on top of a cylinder (to model the balloon it is placed on when the stent is first placed in the vessel). When the stent expands, it passes right through the artery instead of coming into contact with it and stop expanding. My ANSYS file can be found at this link (the link should work - if not, let me know). If anyone can provide some help to solve this issue or has a functional stent ANSYS model that I could see, that would be much appreciated! Thank you! https://cornell.box.com/s/frf1cqx3pk...4ajt147vk81ws4 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Command Line Run for ANSYS | Liaquat | ANSYS | 11 | April 19, 2018 10:49 |
Modeling both radiation and convection on surfaces - Ansys Transient Thermal R13 | s.mishra | ANSYS | 0 | March 31, 2012 05:12 |
How to model concrete slab in ANSYS and apply 2 million cyclic load. | jjc | ANSYS | 3 | April 12, 2011 05:47 |
Difference between ANSYS CFD & CFD | solamy | ANSYS | 3 | October 21, 2010 17:06 |
Ansys workbench problem | Jonny6001 | ANSYS | 2 | September 30, 2010 13:59 |