 |
 |
 |
|
|
|
[Sponsors] | ||||
Struggling to create inflation layer around 3D aerofoil in Ansys (CFX) |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 1, 2018, 08:21
|
Struggling to create inflation layer around 3D aerofoil in Ansys (CFX)
|
#1 |
|
New Member
Duncan
Join Date: Feb 2018
Posts: 1
Rep Power: 0  |
Hey people! Been suffering for weeks now to generate an inflation layer around a 3D aerofoil I am analysing for my dissertation project at university. It is becoming a real pain and any guidance would be amazing! I've tried to get around the problem by increasing the mesh quality around the aerofoil but an inflation layer is what's really needed. You can see the results I have got so far and see the issue I've got because of the lack of inflation layer. Any help would be really appreciated in generating it! Thanks
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| y+ = 1 boundary layer mesh with snappyHexMesh | Arzed23 | OpenFOAM Running, Solving & CFD | 6 | November 23, 2022 15:15 |
| [ANSYS Meshing] Cannot create inflation over entire boundary layer | Azeem | ANSYS Meshing & Geometry | 3 | March 21, 2017 15:37 |
| Can you help me with a problem in ansys static structural solver? | sourabh.porwal | Structural Mechanics | 0 | March 27, 2016 17:07 |
| 2-way FSI in Ansys CFX 15 | LucasGasparino | CFX | 3 | August 6, 2015 03:17 |
| [ANSYS Meshing] Unable to create inflation layer (with picture) | rene78 | ANSYS Meshing & Geometry | 4 | March 14, 2013 16:09 |
Linear Mode
