|
[Sponsors] |
Build a geometry from point cloud data from LIDAR scan |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 22, 2019, 11:16 |
Build a geometry from point cloud data from LIDAR scan
|
#1 |
New Member
Rasna Sharmin
Join Date: May 2019
Posts: 3
Rep Power: 7 |
Hello
I have LIDAR scan data of my flume bed which I have in .xyz , .dxf , .xml format. I want to use that data to build entire flume geometry and run the model in ANSYS FLUENT. How can I do that? Any suggestion? Regards Rasna |
|
Tags |
ansys fluent 19.0, geometry fluent, point cloud |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] How to define to right point for locationInMesh | Mirage12 | OpenFOAM Meshing & Mesh Conversion | 7 | March 13, 2016 14:07 |
a reconstructPar issue | immortality | OpenFOAM Post-Processing | 8 | June 16, 2013 11:25 |
[ANSYS Meshing] Importing Cylinders by Point Data Input with Radii | EphemeralMemory | ANSYS Meshing & Geometry | 2 | May 31, 2012 13:34 |
Point cloud data | ms | Main CFD Forum | 1 | July 25, 2006 16:54 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |