|
[Sponsors] |
May 21, 2012, 03:15 |
modelling particle curtain
|
#1 |
New Member
sepideh
Join Date: Jul 2011
Posts: 21
Rep Power: 14 |
Im modelling heat transfer of sand particles in ambient air in a rectangular box with E-E approach.At the top of the box there is slot in which particles falling down and the size of the slot is 10 mm,and the box size is 450*900*225mm.
The problem is in my geometry when I'm measuring everything to make sure that the slot is in the middle of the box,everything is symmetric at both side.But in my results when I put the line at the middle of the box,the middle line is not at the middle of the slot.I don't know if the slot is not in the middle of the box or the line.But the coordinates are ok for both. This problem makes the particles curtain unsymmetric! I was wondering if anybody could help me. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blood Damage Modelling via Particle Tracking in a Centrifugal Heart Pump | scatman | CFX | 7 | January 8, 2018 00:59 |
Modelling particle flow | MacWnc | FLUENT | 0 | June 17, 2010 04:06 |
DPM UDF particle position using the macro P_POS(p)[i] | dm2747 | FLUENT | 0 | April 17, 2009 01:29 |
particle transfer modelling | pankaj | CFX | 0 | January 10, 2008 01:03 |
particle tronsport modelling | Amara Mohamed | CFX | 0 | November 6, 2003 03:09 |