|
[Sponsors] |
Question about turbulence modeling choose for this case |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 25, 2012, 05:09 |
Question about turbulence modeling choose for this case
|
#1 |
Senior Member
Meimei Wang
Join Date: Jul 2012
Posts: 494
Rep Power: 15 |
Hi
I'm using K-Omega model to detect the pressure drop of my flow. But from the comparison with the experimental data, my simulation result around a strong fluid streamline curvature is very inaccurate.(There's a corner in my geometry. So that the flow suddenly turns 90 degrees.) The simulation pressure drop result at the corner is much larger than the experimental data. It seems that the K-Omega model doesn't work well for the strong fluid curvature. May I ask what turbulence model shall I choose for this case? Thank you very much!
__________________
Best regards, Meimei |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turbulence postprocessing | Mohsin | FLUENT | 2 | October 3, 2016 14:18 |
Discussion: Reason of Turbulence!! | Wen Long | Main CFD Forum | 3 | May 15, 2009 09:52 |
Hypersonic Aerothermodynamics Turbulence Modeling | Mu Ke | Main CFD Forum | 0 | June 13, 2007 03:28 |
CFD-Wiki Monthly Focus Area: Turbulence Modeling | Jonas Larsson | Main CFD Forum | 0 | May 6, 2006 19:08 |
turbulence model question | Jason Wei | Main CFD Forum | 1 | May 6, 2003 00:45 |